All GEAR Side Drive in Oil Bath Gear Box - NO Belts, NO Chains Only Excellent Results & Excellent Power Transfer!
Rock Crushing Capable
Valentini VN2500DT With Hydraulically Controlled Packer Roller, Hydraulically Controlled Rear Gate, and Height Adjustable Skid Shoes. Use the Hydraulically Controlled Packer Roller for ‘On-The-Fly’ Working Depth Control. Use the Hydraulically Controlled Rear Gate for ‘On-The-Fly’ Control of the Diminishing Chamber: The More the Gate is Closed, the Smaller the Particles, But the Greater Demand, and Slower Ground Speed, The More the Gate is Opened, the Larger the Particles, and Less Demand, and Faster Ground Speed!
'VN' SERIES FORESTRY TILLERS FOR 110-380HP TRACTORS
As with ALL Valentini Forestry Tillers, the 'VN' Series has been Providing Superior 'Single Pass' Results in All Applications: Land Clearing & Reclamation, Agriculture (Row Cropping, Produce Rows, Pastures, Seed Bed Preparation, Horticultural Benches & Rows, Vineyards, Orchards, Groves, etc.), as well as Rough or Finish Grading in Pre & Post Construction Applications. From Stump Grinding, Soil Shredding, Soil Stabilization and even Stone Crushing, Valentini Forestry Tillers Have Been CRUSHING IT for Decades!!! In the Sample Videos Below, You'll See Evidence of the Superior Single Pass Performance in the Absolute Worst & Most Demanding Conditions, Crushing Rock! Compared to Rock Crushing the Largest, Hardest Tree Stumps, and any other Timber or Organic Matter, even the Driest & Hardest Clay Soils & Shale, are a Piece of Cake!
STANDARD FEATURES:
Category 2, 3-Point Hitch.
Cam Clutch Protected PTO Shaft!
It Doesn't Get Any Better Than a Cam Clutch: The Most Efficient & Reliable Driveline Protection Available!
No Maintenance, Automatic Clearing & Resetting After Locked Rotor Conditions.
Dual Transmission Models have Slip Clutch Protected Side Drive Shafts.
Forestry Tiller's 'Diminishing Chamber' is Comprised of the Following:
Front Shear Bar Provides First Mechanical Contact for Reducing Fragments.
Rear Hardox Grid Provides Secondary Contact for Further Fragmentary Reduction.
Hydraulically Controlled Rear Containment Door Controls the Duration That Fragments Remain in the Chamber:
Rear Containment Door Can be Opened or Closed On-The-Fly During Operation!
Containment Door Constructed for Extreme Service Duty & Wear Resistance.
Forestry Tiller's Body Internal Hardox Lining is Replaceable.
Hydraulically Controlled Front Opening Gate & Deflectors for Infinite Adjustment.
Keep Front Gate Closed for Max Deflector Use, or Open For Max Working Depth.
Extreme Service Duty Rotor is Shock & Wear Resistant.
26.5" Rotor Working Diameter, Tip to Tip.
Central & Side Gear Drives in Oil Bath Gearboxes.
Single Transmission Units Have Oil Bath Bearing Enclosures for Non-Drive Side.
Dual Transmission Units have Oil Bath Gearboxes on Both Sides.
Unique & Patented Labyrinth Seals Ensure Bearings are Protected from Dirt!
Valentini VN2500DT Reclaiming Wasteland and Developing Seedbed For Productive Service ‘In One Efficient Pass’
Top View (From Tractor Cab) of The Valentini VN2500DT
For Mulching Wood Debris, Stump Grinding & Stone Crushing in the Most Demanding Conditions, Including Sandy, Abrasive Soils, Leaving Behind a Beautiful Seed Bed!
Valentini ‘VN1000’ Forestry Tiller w/Offset to Accommodate Driving & Mulching Thru Rows as Shown!
Valentini ‘RA2500’ Forestry Tiller Deep Mulching Stumps & Roots After Clear Cutting a Large Field of Mature Mixed Trees!
Valentini ‘VN 2500DT’ Side View: Roller Down, Side Skid Shoes Retracted
Valentini ‘VN 2500DT’ Side View: Roller Up, Side Skid Shoes Extended: Left & Right Side Plate Cutouts Are For Access To Skid Shoe Retract-Extend Adjustment
'VN' SERIES FORESTRY TILLER SPECIFICATIONS
MODEL
VN1000
VN1300
VN1500
VN1800DT
VN2000DT
VN2300DT
VN2500DT
VN2800DT
Tractor Horsepower (PTO)
110-190HP
130-190HP
140-190HP
180-380HP
200-380HP
220-380HP
230-380HP
250-380HP
Rotor Speed
245 RPM
Working Width
42"
52"
62"
74"
81"
7'-11"
8'-5"
9'-8"
Overall Width
60"
70"
80"
90"
98"
9'-2"
9'-10"
10'-9"
Quantity of Teeth
90
110
130
145
160
187
200
229
Working Depth on Non-Passive Surfaces
(e.g. Asphalt, Sheets of Granite, etc.)
7"
Working Depth on Passive Surfaces
(e.g. Dirt, Gravel, Sod, etc.)
14"
Weight
4,950 lbs.
5,830 lbs.
6,710 lbs.
9,130 lbs.
9,790 lbs.
10,780 lbs.
11,440 lbs.
12,000 lbs.
Weights are Less Pallets, Crates, PTO Shaft & Rollers.
(DT) Denotes Double Transmission.
'VN' SERIES CRUSHER SPECIFICATIONS
MODEL
VN1000
VN1300
VN1500
VN1800DT
VN2000DT
VN2300DT
VN2500DT
VN2800DT
Tractor Horsepower (PTO)
110-190HP
130-190HP
140-190HP
180-380HP
200-380HP
220-380HP
230-380HP
250-380HP
Rotor Speed
245 RPM
Working Width
42"
52"
62"
74"
81"
7'-11"
8'-5"
9'-8"
Overall Width
60"
70"
80"
90"
98"
9'-2"
9'-10"
10'-9"
Quantity of Teeth
90
110
130
145
160
187
200
229
Working Depth on Non-Passive Surfaces
(e.g. Asphalt, Sheets of Granite, etc.)
7"
Working Depth on Passive Surfaces
(e.g. Dirt, Gravel, Sod, etc.)
14"
Weight
4,950 lbs.
5,830 lbs.
6,710 lbs.
9,130 lbs.
9,790 lbs.
10,780 lbs.
11,440 lbs.
12,000 lbs.
Weights are Less Pallets, Crates, PTO Shaft & Rollers.
(DT) Denotes Double Transmission.
Specifications & Designs Are Subject to Change Without Notice
All, and any text, verbiage, and worded explanations, along with all photos, images, and videos are the sole copyrighted property of Iowa Farm Equipment, and are exclusively reserved for use by Iowa Farm Equipment ownership only. Any electronic or digital copying or reproduction of any kind, of all, and any text, verbiage, and worded explanations, along with all photos, images, and videos, in part, or in entirety are prohibited, and will be considered a violation of our copyrights. This applies to all, and any applications, all and any businesses, all and any persons outside of the ownership of Iowa Farm Equipment; Private, Commercial, Governmental, etc. Exceptions may be granted, but only by documented permission from Iowa Farm Equipment legal representatives. Use the Contact Us link to make your request.