Valentini 'L' Series Rock & Stone Crushers, Asphalt Grinders & Milling Machines, Soil Stabilizers
All GEAR Side Drive in Oil Bath Gear Box - NO Belts, NO Chains Only Excellent Results & Excellent Power Transfer!
Valentini L1500 Recovering Wasteland In One, Beautiful & Efficient Pass!
'L' SERIES STONE CRUSHERS FOR 80-170HP TRACTORS
As with ALL Valentini Crushers, the 'L' Series has been Providing Superior Single Pass Results in All Applications: Land Reclamation, Agriculture (Row Crop Fields, Produce Rows, Pastures, Seed Bed Preparation, Horticultural Benches & Rows, Vineyards, Orchards, Groves, etc.), Roadway Maintenance & Paving (Gravel & Chip Seal Roads, Asphalt Roads & Highways), as Well as Rough or Finish Grading in Pre & Post Construction Applications. From Rock & Stone Crushing, Stump Mulching, Soil Shredding, Soil Stabilization, and Asphalt Pulverizing/Grinding, Valentini Crushers Have Been CRUSHING IT for Decades!!! In the Sample Videos Below, You'll See Evidence of the Superior Single Pass Performance, Even Shaving Tops off of the Outcroppings of Embedded Boulders, Even at Work Crushing & Pulverizing Limestone!
STANDARD FEATURES:
Category 2, 3-Point Hitch.
Cam Clutch Protected PTO Shaft!
It Doesn't Get Any Better Than a Cam Clutch: The Most Efficient & Reliable Driveline Protection Available!
No Maintenance, Automatic Clearing & Resetting After Locked Rotor Conditions.
Dual Transmission Models have Slip Clutch Protected Side Drive Shafts.
Crushers 'Diminishing Chamber' is Comprised of the Following:
Front Shear Bar Provides First Mechanical Contact for Reducing Fragments.
Rear Hardox Grid Provides Secondary Contact for Further Fragmentary Reduction.
Hydraulically Controlled Rear Containment Door Controls the Duration That Fragments Remain in the Chamber:
Rear Containment Door Can be Opened or Closed On-The-Fly During Operation!
Containment Door Constructed for Extreme Service Duty & Wear Resistance.
Crusher Body Internal Hardox Lining is Replaceable.
Extreme Service Duty Rotor is Shock & Wear Resistant.
19" Rotor Working Diameter, Tip to Tip.
Central & Side Gear Drives in Oil Bath Gearboxes:
Single Transmission Units Have Oil Bath Bearing Enclosures for Non-Drive Side.
Dual Transmission Units have Oil Bath Gearboxes on Both Sides.
Multi-Speed Central Gearbox ‘Option’ Available For Faster Rotor Speed:
Two Speeds @ 540 & Two Speeds @1000RPM.
Faster Rotor Speed Recommended for the Most Demanding Rock Applications.
Faster Rotor Speed Also Recommended for Max Reduction of Woody Material w/No 40 Teeth!
Unique & Patented Labyrinth Seals Ensure Bearings are Protected from Dirt!
Wear Plates/Skid Shoes on Both Sides of Crusher.
Valentini L1500 Crusher Grinding & Milling Frozen Manure & Ice In A Frozen Feed Lot!
Beautiful, Fertile Ground Reclaimed in a Single Pass with the Valentini L1800 Crusher
Valentini’s Carbide ‘Bullet Style Teeth’ For The Most Severe Conditions, Including Milling!
Efficiently ‘Chevron Patterned’ with Anvil Counter Crushing Bar & Secondary Reducing Grid
For Stone Crushing, Finer Mulching of Wood Debris, and Sandy, Abrasive Soil Conditions! Multi-Speed Gearbox For Superior Performance in Universal Applications!
Valentini Double Transmission L2300DT With Hydraulically Operated Rear Gate For ‘On-The-Fly’ Control of Opening/Closing to Control Fragment Size & Ground Speeds!
Beautifully Reclaimed Vineyard Aisleways Making Access Convenient & Safe for Personnel & Equipment!
Valentini L2300DT With Hydraulically Operated Rear Gate For ‘On-The-Fly’ Control of Diminishing Chamber Gate & Also Hydraulically Controlled Rear Packer Roller For Efficient & Convenient ‘On-The-Fly’ Working Depth Adjustment!
Valentini L1500 Rear Blade With Adjustable Spring Tensioned Moldboard, Hydraulic Raise & Lower & Manual Angle (Horizontal & Vertical)
‘L’ Series Rock Crusher with Road Grader Blade Dressing a Gravel Road in One Efficient Pass!
'L' SERIES CRUSHER SPECIFICATIONS
MODEL
L1000
L1300
L1500
L1800DT
L2000DT
L2300DT
Tractor Horsepower (PTO)
80-110HP
80-110HP
90-110HP
110-170HP
110-170HP
110-170HP
PTO Speed
540 RPM
540 RPM
540 RPM
1000 RPM
1000 RPM
1000 RPM
Rotor Speed
323 RPM
328 RPM
Working Width
42"
52"
62"
72"
82"
92"
Overall Width
51"
61"
71"
82"
92"
101"
Quantity of Teeth
78
93
108
122
140
162
Working Depth on Non-Passive Surfaces
(e.g. Asphalt, Sheets of Granite, etc.)
3"
Working Depth on Passive Surfaces
(e.g. Dirt, Gravel, Sod, etc.)
7"
Weight
2,200 lbs.
2,618 lbs.
2,910 lbs.
3,630 lbs.
3,960 lbs.
4,290 lbs.
Weights are Less Pallets, Crates, PTO Shaft & Rollers.
(DT) Denotes Double Transmission
'L' SERIES CRUSHER SPECIFICATIONS
MODEL
L1000
L1300
L1500
L1800DT
L2000DT
L2300DT
Tractor Horsepower (PTO)
80-110HP
80-110HP
90-110HP
110-170HP
110-170HP
110-170HP
PTO Speed
540 RPM
540 RPM
540 RPM
1000 RPM
1000 RPM
1000 RPM
Rotor Speed
323 RPM
328 RPM
Working Width
42"
52"
62"
72"
82"
92"
Overall Width
51"
61"
71"
82"
92"
101"
Quantity of Teeth
78
93
108
122
140
162
Working Depth on Non-Passive Surfaces
(e.g. Asphalt, Sheets of Granite, etc.)
3"
Working Depth on Passive Surfaces
(e.g. Dirt, Gravel, Sod, etc.)
7"
Weight
2,200 lbs.
2,618 lbs.
2,910 lbs.
3,630 lbs.
3,960 lbs.
4,290 lbs.
Weights are Less Pallets, Crates, PTO Shaft & Rollers.
(DT) Denotes Double Transmission
Specifications & Designs Are Subject to Change Without Notice
All, and any text, verbiage, and worded explanations, along with all photos, images, and videos are the sole copyrighted property of Iowa Farm Equipment, and are exclusively reserved for use by Iowa Farm Equipment ownership only. Any electronic or digital copying or reproduction of any kind, of all, and any text, verbiage, and worded explanations, along with all photos, images, and videos, in part, or in entirety are prohibited, and will be considered a violation of our copyrights. This applies to all, and any applications, all and any businesses, all and any persons outside of the ownership of Iowa Farm Equipment; Private, Commercial, Governmental, etc. Exceptions may be granted, but only by documented permission from Iowa Farm Equipment legal representatives. Use the Contact Us link to make your request.