FLOATING HEAD FOR PRECISION Manicure, Rough Cut, VertiCut & Fraise Mowing
5Cu. Yard High-Lift Hopper
Peruzzo Tiger 2000 Professional VertiCutter, Fraise Mower & Flail Mower
The Tigers Contour Following ‘Floating Cutting Head’ Ensures Consistent Working Depth For Verticutting & Fraise Mowing, and Also Provides a Consistent Manicuring Height! The Pull Type Drawbar Configuration Accommodates Smaller & Lighter Tractors in the Handling of the Large 5Cu Yard Capacity Hi-Lift Hopper and the 94” Lift Height!
STANDARD FEATURES:
Peruzzo’s Tiger 2000 Professional with the ‘Floating Cutter Head’ Provides Superior Cut & Manicuring Performance, Superior Verticutting Performance as well as Superior Fraise Mowing Results, All With Consistent Working Depths, and a Large 5Cu Yard Capacity Hopper For Collecting All the Residue!
The Tiger 2000 Professional Includes all Four Sets of Blades Available:
Formed Steel Blades
Forged & Hardened Hammer Blades
VertiCutting Blades
Air Blades (for Verticutting Blades)
Photos of All Blades Are Near Bottom of This Page!
The 94” Lift Height of the Tiger 2000 Professional Enables Emptying of Collected Materials Into Large Containers, Dumpsters, Dump Trucks, etc!
Collection Hopper is Hydraulically Elevated and the Hopper Door's ‘Open-Close’ Function Also Operates Hydraulically For ‘Hands & Labor Free’ Emptying of Collected Material:
Requires Two Hydraulic Circuits:
One for Hopper Raise & Lower Functions.
One for Hopper Door Open & Close.
Italian Gearbox with Internal Over-Running Clutch!
The Tiger 2000 Professional Collection Mower Will Also Fraise/Fraze Mow to 1” Below Grade.
Heavy Duty Rotor with the Forged & Hardened Hammer Blades Are Rated to Cut to 2” Diameter Material.
Audible ‘Hopper Full Alarm’.
Requires 12vdc.
Built-In Striping Kit!
Powder Coated Paint!
Tractors Shown For Reference Only - Not Included.
Mower Includes Gage Wheels (as shown) & 540RPM PTO Shaft!
Three Pairs of Duplex Turf Tires Support the Large Hopper Capacity and its’ Potential Weight, While Also Accommodating Soft & Moist Ground Conditions!
Lengthy Drawbar with Vertical Oscillation Provides Isolation of Tractors Vertical Movement so The Front & Rear Gage Wheels Will Maintain Pre-Set Working Depth and Also Allows The Floating Head to Follow the Terrain and Not The Tractor! The Lengthy Drawbar Also Accommodates Maneuvering Turns, Backing Up and Dumping. Yes, The Tiger is Capable & Durable Enough to VertiCut Through Tall Grasses & With the Multiple Flail Blades Available, The Tiger 2000’s Durability Will Also Produce a Beautiful Manicured Finish Even In Tall & Thick Stands of Vegetation!
94” Dumping Height Clearance Accommodates 4, 6 & 8 Yard front Load Trash Bins, Roll Off Bins with 6’ Side Height, Pickup Trucks, and Dump Bodies on Single Axle Trucks!
VertiCut Sample Images
BLADES INCLUDED
Solid Hardox VertiCutting Blade with Air Paddles ‘SOLID HARDOX’ – As Good As It Gets!
ADDITIONAL BLADES INCLUDED The TIGER 2000 Professional is a Precision VertiCutting Machine, a Precision Fraise Mowing Machine and a Precision Flail Mower!
Rotor is Highly Populated with Hardox VertiCut Blades & Air Paddles for Material Propulsion
TIGER 2000 PROFESSIONAL SPECIFICATIONS
Horsepower
125HP
RPM
540
Overall Width
99"
Working Width
77"
Overall Length (Excluding Draw Bar Hitch)
102"
Overall Height
71"
Maximum Working Depth
1.5"
Quantity of Blades
64
Collection Hopper Capacity
5cu. Yards
Fraise/Fraze Mowing Depth
1" Below Grade
Cutting Capacity
2" Dia.
Cutting Height
5"
Weight, Empty
3,638 lbs.
Weight is Less Pallets, Crates & PTO Shaft.
TIGER 2000 PROFESSIONAL SPECIFICATIONS
Horsepower
125HP
RPM
540
Overall Width
99"
Working Width
77"
Overall Length (Excluding Draw Bar Hitch)
102"
Overall Height
71"
Maximum Working Depth
1.5"
Quantity of Blades
64
Collection Hopper Capacity
5cu. Yards
Fraise/Fraze Mowing Depth
1" Below Grade
Cutting Capacity
2" Dia.
Cutting Height
5"
Weight, Empty
3,638 lbs.
Weight is Less Pallets, Crates & PTO Shaft.
Specifications & Designs Are Subject to Change Without Notice