OMARV Severe Duty Commercial 'CT' Series Multi-Purpose Excavator Flail Mowers/Mulchers/Shredders: Heavy Duty Hammer Blades & Rear Rollers
Suitable for 3.5 to 7 Ton Excavators
OMARV CT120 w/Bobcat Pin-On Coupler Quick Couplers Are Available For All Makes & Models
OMARV ‘CT100’ Commercial Duty Flail Mower/Mulcher with Hammer Blades, Rear Rollers & Quick Coupler Front & Rear Views
OMARV Commercial Duty Flail Mulchers/Mowers: Excellent Single Pass Rough Cutting & Finish Mowing Results All With The Same Mower Deck & Blades! OMARV Flail Mowers Make Mowing & Mulching Efficient Again!
Suitable For 3.5 to 7 Ton Machines with Hydraulic Flow Rates of 12 to 30GPM’s.
OMARV Flail Mowers Are Always Highly Populated With Blades To Provide The Best Possible Cut & Reduce The Burden On Your Excavator:
OMARV’s Swinging Hammer Blades Will Last Longer & Be More Efficient During Operation By Reducing The Demand Back To Your Excavators Hydraulic System – Very Important On Smaller Excavators With Limited Hydraulic Capacity, Particularly During Demanding Applications! OMARV’s Swinging Hammer Blades Are Double Sided & Sharpenable, Adding To The Life Of OMARV’s Hammer Blades!
Along With The Severe Duty Swinging Hammer Blades, The Spiral Blade Arrangement On The Rotor Makes The Flail & Mulching Deck Perfect For Thick, Heavy Grasses, Reeds, Brushes, Branches, Prunings, Saplings, And Small Trees Up To 3”!
Higher Flow Rates Are Required For Maximum Performance!
In Addition To The Built-In Hydraulic Pressure Relief Valve, The Hydraulic Case Drain Ensures Smooth Shutdown, and Hydraulic System Protection of The Excavator.
Rear Roller Is Adjustable For Cutting Height Setting.
Excavator Quick Coupler Is Included.
Front View w/Quick Coupler & Severe Duty Hinged Access Cover
Front Iso View w/Quick Coupler & Severe Duty Hinged Access Cover
CT100 Bottom View Showing Rotor with Blades & Rear Roller With Large Open Area Around Rotor & Blades, Which Accommodates Rapid, Unhindered Pass-Thru Of Large Volumes Of Material, Which Reduces Demand On The Excavators Hydraulic System, Contributing to Cooler Hyd System Operation and Enabling Efficient Performance By Reducing Under Deck Clogging!
OMARV 'CT' SERIES SPECIFICATIONS
MODEL
CT80
CT100
CT120
Working Width
32"
40"
48"
Number of Hammers
18
24
30
Cut Capacity with Hammers
3"
Number of Y Knives
36"
48
60
Cut Capacity with Y Knives
1.5"
Max PSI
3100-3250
3100-3250
3200-3700
Hyd Flow Required
12 GPM
16 GPM
16 GPM
Rec. Excavator Size
3.5 Ton
5 Ton
7 Ton
Weight
396 lb's
495 lb's
594 lb's
Weights are Less Pallets, Crates & Excavator Coupler.
OMARV 'CT' SERIES SPECIFICATIONS
MODEL
CT80
CT100
CT120
Working Width
32"
40"
48"
Number of Hammers
18
24
30
Cut Capacity with Hammers
3"
Number of Y Knives
36"
48
60
Cut Capacity with Y Knives
1.5"
Max PSI
3100-3250
3100-3250
3200-3700
Hyd Flow Required
12 GPM
16 GPM
16 GPM
Rec. Excavator Size
3.5 Ton
5 Ton
7 Ton
Weight
396 lb's
495 lb's
594 lb's
Weights are Less Pallets, Crates & Excavator Coupler.
Weights are Less Pallets, Crates & PTO Shaft.
Specifications & Designs Are Subject to Change Without Notice
All, and any text, verbiage, and worded explanations, along with all photos, images, and videos are the sole copyrighted property of Iowa Farm Equipment, and are exclusively reserved for use by Iowa Farm Equipment ownership only. Any electronic or digital copying or reproduction of any kind, of all, and any text, verbiage, and worded explanations, along with all photos, images, and videos, in part, or in entirety are prohibited, and will be considered a violation of our copyrights. This applies to all, and any applications, all and any businesses, all and any persons outside of the ownership of Iowa Farm Equipment; Private, Commercial, Governmental, etc. Exceptions may be granted, but only by documented permission from Iowa Farm Equipment legal representatives. Use the Contact Us link to make your request.