Wheatheart High & Heavy Hitter Center Mast Post Drivers

Free-Standing Units add Stability while Driving Posts and are Easy to Store.


CENTER MAST MODEL

  • Available with Universal Skid-Steer Mount or Cat I or II 3-Point Hitch Tractor Adapter.
  • Universal Mount Plate Allows for Easy Installation, Taking Only a Few Minutes to Mount or Detach From your Skid-Steer.
  • 660 lb Heavy Duty Hammer Drives Wood or Steel Posts Up to 12" in Diameter into Hard Ground.
  • 64" Stroke.
  • Four Hammer Head Mounting Positions for Adjustable Height From 9'6" to 11'3".
  • 3-Point Hitch Model Available with PTO or Tractor Supplied Hydraulics.
  • Skid-steer Model Available with Self-Contained Hydraulic Drive or Skid Steer Supplied Hydraulics.
  • Capable of Driving Posts to a Height of Approximately 50".

High & Heavy Hitter Center Mast Model - Post Pounder/Post Driver Features

  • 3-Point Hitch Models and Skid Steer Models are Free-Standing for Additional Safety while Attaching or Detaching From the Skid-Steer or Tractor.
  • Adjustable Hammer Height to Accommodate Different Post Lengths.
  • Center Mast Models Adapt to Skid-Steer Loaders and Compact Tractors (Compact Tractors must have Front Weights and/or a Front-End Loader Installed for Safety and Balance).
  • Greaseless Horizontal Poly Slides.
  • Swivel Control Panel with Joystick Hydraulic Controls.
  • Trailer Models have a Wide Stance, Weighted Counter-Balance and Low Center of Gravity for Balance and Stability.
  • Wheatheart Post Pounders are Designed for Ease of Operation and Low Maintenance.

Put Posts Exactly Where You Want Them

All Side Mast Wheatheart Post Pounders Offer 16" of Lateral Movement Coupled with a Four-Way Tilt Mast which Allows 16" of Side to Side Movement. This Provides added Post Positioning Flexibility and Convenience for Perfect Post Placement.

Hydraulic Control Lever - Easy Operation

Operating the Post Pounder is Made Easy with our Joystick Hydraulic Control Lever. Activate the Two Hydraulic Tilt Cylinders with the Conveniently Located Joy Stick Control. You can Direct the Four Way Tilt Mast Side to Side and Forward or Backward Allowing Perfect Post Alignment in Uneven Terrain.

High & Heavy Hitter Side Mast Post Pounder/ Post Driver

  • 3 Point Hitch Models and Skid Steer Models are Free Standing for Additional Safety while Attaching or Detaching From the Skid Steer or Tractor.
  • Adjustable Hammer Height to Accommodate Different Post Lengths.
  • Greaseless Horizontal Poly Slides.
  • Side Mast 3 Point Hitch Models are Counter Balanced Maintaining Balance and Stability.
  • Swivel Control Panel with Joystick Hydraulic Controls.
  • Trailer Models have Wide Stance, Weighted Counter-Balance/Post Carrier and Low Center of Gravity for Balance and Stability.
  • Wheatheart Post Pounders are Designed for Ease of Operation and Low Maintenance.

Water Spike Kit - Optional

The Water Spike Kit Cuts a Pilot Hole Through the Hardest Ground! For High & Heavy Hitter and High & Heavy Hitter Plus Side Mast Trailer Models. Handy Self Contained Power Wand Reduces Pounder Strokes by Up to 50% and Saves Valuable Time. The Results are Less Post Damage and Straighter Fence Lines.

Post Hugger

Put Posts Exactly Where You Want Them! All Wheatheart side mast Post Pounders offer 16" of lateral movement coupled with a four-way tilt mast, which allows side to side movement.This provides added post positioning and convenience for perfect post placement. Post Hugger (left), standard on all models, helps align posts for added convenience and safety.

Pilot Auger Attachment - Optional

Pilot Auger Attachment Features

  • Drills Through any Soil Condition and Most Rock Obstructions Up to a 40” Depth.
  • Easy Installation – Mounts Directly to Driver Mast, Allowing You to Tilt the Pilot Auger to the Required Angle.
  • Down Pressure Cylinder Allows Operator to Apply as Much Force on the Auger Bit as Required.
  • Hydraulic Controls Conveniently Located by Standard Operator Controls.
  • A High Torque, Reversible Hydraulic Motor is Coupled to a Double Bearing Housing.
  • Powered by Tractor or Skid Steer Hydraulics.
  • Choice of 4-1/2” or 6” Hard Surfaced Auger Bits with Replaceable Carbide Teeth.
  • Minimum Hydraulic Requirements 10 GPM at 1600 PSI.

Universal Mount Plate Features

  • Easy Installation, Taking Only a Few Minutes to Mount or Detach from Your Skid Steer.

Universal Mount Plate

Self-Contained Hydraulic System - Optional

Self-Contained Hydraulic System Features

  • Available for Skid Steer Center Mast Model Only.
  • The 4.5 Cubic Inch Motor Drives an Efficient High Volume Pump.
  • The Post Pounder Frame is Utilized as an Oil Reservoir which Dissipates Heat Effectively.
  • The Self-Contained Hydraulic System Eliminates any Risk of Oil Contamination to the Power Unit.