Virnig Brush Cutters



Virnig V40 Rotary Brush Cutter - Standard Deck Virnig V40 Rotary Brush Cutter - Open Front Deck Virnig V50 Rotary Brush Cutter - Standard Deck
V40 ROTARY BRUSH CUTTER -
STANDARD DECK
V40 ROTARY BRUSH CUTTER -
OPEN FRONT DECK
V50 ROTARY BRUSH CUTTER -
STANDARD DECK

Virnig V50 Rotary Brush Cutter - Floating Deck

Virnig V50 Rotary Brush Cutter - Open Front Deck

Virnig V60 Industrial Rotary Cutter
V50 ROTARY BRUSH CUTTER -
FLOATING DECK
V50 ROTARY BRUSH CUTTER -
OPEN FRONT DECK
V60 INDUSTRIAL ROTARY CUTTER


Virnig V40 Rotary Brush Cutter - Standard Deck

Virnig V40 Rotary Brush Cutter - Standard Deck

Designed to Quickly Clear and Mulch Brush and Small Trees Up to 3" in Diameter.

  • Three-Blade Cutting System, Mounted to a Circular Flywheel Ensuring Flywheel Bounces Off Stumps Rather than Catching and Damaging Components.
  • Standard Dual Hydraulic Pressure Relief Valves with Dynamic Braking Stops the 170-220 lb Flywheel in Under 10 Seconds.
  • Direct Drive Eaton® Motor Rated Up to 25 GPM for Usage on a Wide Variety of Skid Steers.
  • Bracing Along the Top Connected to a Push Bar at the Front Provides Rigidity for Pushing Over Thick Brush and Small Trees.
  • 1/2" x 4" Single Side Updraft Blades for Efficient Cutting and Mulching.
  • See the V50 Rotary Brush Cutter - Standard Deck for a Closed Deck Mower with More Features and Options.
  • See the V40 Rotary Brush Cutter - Open Front for a Similar Mower with an Open Front.
  • DO NOT OPERATE ROTARY BRUSH CUTTER WITHOUT A SHATTERPROOF CAB DOOR ON LOADER

    MODEL V40 ROTARY BRUSH CUTTER - STANDARD DECK
    MODEL BBV60 BBV72
    Cut Width 60.0. 72.0
    Overall Cutter Width (Inches) 66.0 78.0
    Cutter Depth (Inches) 74.0 86.0
    Cutter Height (Inches) 21.4
    Deck Height (Inches) 7.7
    Minimum Cut Height (Inches) 1.9
    Cutting Capacity, Diamter
    (Inches)
    3.0
    Top Deck Thickness (Inches) 0.19*
    Side Deck Thickness (Inches) 0.25*
    Recommended Flow Rate (GPM) 16-25
    Approximate Weight (Pounds) 1075 1300
    Recommended Loader Capacity Greater Than 1500 Pounds
    *Deck Material is Grade 50 Plate (50,000 PSI Minimum Yield Strength).
    The Data Refers to the Machine Without Options.
    Specifications & Designs Are Subject to Change Without Notice



    Virnig V40 Rotary Brush Cutter:
    Open Front Deck

    V40 Rotary Brush Cutter - Open Front Deck

    Open Front Skid Steer Brush Cutter Designed to Rough-Cut Dense Brush and Trees Up to 3" in Diameter.

    • Three-Blade Cutting System, Mounted to a Circular Flywheel Ensuring Flywheel Bounces Off Stumps Rather than Catching and Damaging Components.
    • Standard Dual Hydraulic Pressure Relief Valves with Dynamic Braking Stops the 170-220 lb Flywheel in Under 10 Seconds.
    • Direct Drive Eaton® Motor Rated Up to 25 GPM for Usage on a Wide Variety of Skid Steers.
    • Tall Push Bar At the Front Provides Rigidity and Helps Push Over Thick Brush and Trees.
    • Able to Cut Down to the Ground to Limit Regrowth.
    • 1/2" x 4" Single Side Updraft Blades for Efficient Cuting and Mulching.
    • See the V60 Industrial Rotary Cutter for a More Robuts Open Front Mower with a Larger Cutting Capacity.
    • See the V40 Rotary Brush Cutter - Standard Deck for a Similar Mower with a Closed Front.

    DO NOT OPERATE ROTARY BRUSH CUTTER WITHOUT A SHATTERPROOF CAB DOOR ON LOADER

    MODEL V40 ROTARY BRUSH CUTTER - OPEN FRONT DECK
    MODEL BBV60-O BBV72-O
    Cut Width 60.0. 72.0
    Overall Cutter Width (Inches) 66.0 78.0
    Cutter Depth (Inches) 71.1 82.1
    Cutter Height (Inches) 21.4
    Deck Height (Inches) 7.7
    Minimum Cut Height (Inches) 1.9
    Cutting Capacity, Diamter
    (Inches)
    3.0
    Top Deck Thickness (Inches) 0.19*
    Side Deck Thickness (Inches) 0.25*
    Recommended Flow Rate (GPM) 16-25 Standard Flow
    Approximate Weight (Pounds) 1090 1310
    Recommended Loader Capacity Greater Than 1500 Pounds
    *Deck Material is Grade 50 Plate (50,000 PSI Minimum Yield Strength).
    The Data Refers to the Machine Without Options.
    Specifications & Designs Are Subject to Change Without Notice



    V50 Rotary Brush Cutter - Standard Deck

    V50 Rotary Brush Cutter - Standard Deck

    • Three-Blade Cutting System, Mounted to a Large Circular Flywheel, Ensures the Flywheel Bounces Off Stumps Rather Than Catching and Damacing Components.
    • Standard Dual Hydraulic Pressure Relief Valves with Dynamic Braking Stops the 170-225 lb Flywheel in Under 10 Seconds.
    • Two Standard Flow and Two High Flow Eaton® Motor Configurations Ensure Optimum Performance and Longevity.
    • Bracing Along the Top Connected to a Push Bar at the Front Provides Rigidity for Pushing Over Thick Brush and Trees.
    • 1/2" x 4" Single Side Updraft Blades for Efficient Cutting and Mulching.
    • Standard Chain Curtain on Front of Deck Prevents Flying Debris and Provides Better Mulching Capability.
    • Standrad Replaceable Front Skid Shoes Increase the Mower Deck's Wear Life.
    • Optional Rear Roller and Swivel Casters Available.
    • See the V40 Rotary Brush Cutter - Standard Deck for a Similar Mower with Less Options and Features.

    Virnig V50 Rotary Brush Cutter Open Front Deck

    Virnig V50 Rotary Brush Cutter Open Front Deck

    Virnig V50 Rotary Brush Cutter Open Front Deck

    Virnig V50 Rotary Brush Cutter Open Front Deck

    DO NOT OPERATE ROTARY BRUSH CUTTER WITHOUT A SHATTERPROOF CAB DOOR ON LOADER

    V50 ROTARY BRUSH CUTTER - STANDARD DECK
    MODEL RBV60 RBV66 RBV72 RBV78
    Cut Width 60.0. 66.0 72.0. 78.0
    Overall Cutter Width (Inches) 66.0 72.0 78.0 84.0
    Cutter Depth (Inches) 81.8 87.8 93.8 99.8
    Cutter Height (Inches) 20.9
    Deck Height (Inches) 8.8
    Minimum Cut Height (Inches) 1.8
    Cutting Capacity, Diamter
    (Inches)
    4.0
    Top Deck Thickness (Inches) 0.25
    Side Deck Thickness (Inches) 0.25*
    Recommended Flow Rate (GPM) 14-25 Standard Flow, 25-42 High Flow
    Approximate Weight (Pounds) 1180 1325 1435 1540
    Recommended Loader Capacity Greater Than 1500 Pounds
    *Deck Material is Grade 50 Plate (50,000 PSI Minimum Yield Strength).
    *High Flow Motor Options Add Approximately 70 Pounds to Model Weight.
    The Data Refers to the Machine Without Options.
    Specifications & Designs Are Subject to Change Without Notice



    V50 Rotary Brush Cutter - Floating Deck

    V50 Rotary Brush Cutter - Floating Deck

    Cuts Through Brush Up to 4" in Diameter with Ease, While Three-Blade Design and Floating Deck Produce a Superior Finish.

    • Innovative Floating Deck Provides a Consistent Cut on Uneven Terrain by Allowing 4 5/8" of Deck Travel. Deck Can Be Secured in a Fixed Position if Desired.
    • Three-Blade Cutting System, Mounted to a Large Circular Flywheel, Ensures the Flywheel Bounces off Stumps Rather than Catching and Damaging Components.
    • Standard Dual Hydraulic Pressure Relief Valves with Dynamic Braking Stops the 170-225 lb Flywheel in Under 10 Seconds.
    • Two Standard Flow and Two High Flow Eaton® Motor Configurations Ensure Optimum Performance and Longevity.
    • Bracing Along the top Connected to a Push Bar at the Front Provides Rigidity for Pushing Over Thick Brush and Trees.
    • 1/2" x 4" Single Side Updraft Blades for Efficient Cutting and Mulching.
    • .
    • Standard Chain Curtain on Front of Deck Prevents Flying Debris and Provides Better Mulching Capability.
    • Standard Replaceable Front Skid Shoes Increase the Mower Deck's Wear Life.
    • Optional Rear Roller and Swivel Casters Available.
    • See the V40 Rotary Brush Cutter - Standard Deck for a Similar Mower with Less Options and Features.
    • See the V50 Rotary Brush Cutter - Standard Deck for a Similar Mower without a Floating Deck.

    V50 Rotary Brush Cutter - Floating Deck

    V50 Rotary Brush Cutter - Floating Deck

    V50 Rotary Brush Cutter - Floating Deck

    V50 Rotary Brush Cutter - Floating Deck

    DO NOT OPERATE ROTARY BRUSH CUTTER WITHOUT A SHATTERPROOF CAB DOOR ON LOADER

    V50 ROTARY BRUSH CUTTER - FLOATING DECK
    MODEL RBV60-F RBV66-F RBV72-F RBV78-F
    Cut Width 60.0 66.0 72.0 78.0
    Overall Cutter Width (Inches) 66.0 72.0 78.0 84.0
    Cutter Depth (Inches) 81.8 87.8 93.8 99.8
    Cutter Height (Inches) 20.9
    Deck Height (Inches) 8.8
    Minimum Cut Height (Inches) 1.8
    Vertical Deck Travel (Inches) 4.625
    Cutting Capacity, Diamater
    (Inches)
    4.0
    Top Deck Thickness (Inches) 0.25'
    Side Deck Thickness (Inches) 0.25'
    Recommended Flow Rate (GPM) 14-25 Standard Flow, 25-42 High Flow
    Approximate Weight (Pounds) 1430 1560 1680 1760
    Recommended Loader Capacity Greater Than 1500 Pounds
    *Deck Material is Grade 50 Plate (50,000 PSI Minimum Yield Strength).
    *High Flow Motor Options Add Approximately 70 Pounds to Model Weight.
    The Data Refers to the Machine Without Options.
    Specifications & Designs Are Subject to Change Without Notice



    V50 Rotary Brush Cutter - Open Front Deck

    V50 Rotary Brush Cutter - Open Front Deck

    Skid Steer Brush Cutter Constructed to Rough-Cut Dense Brush and Remove Trees Up to 6" in Diameter.

    • Three-Blade Cutting System, Mounted to a Flywheel Ensuring Flywheel Bounces Off Stumps Rather Than Catching and Damaing Components.
    • Standard Dual Hydraulic Pressure Relief Valves with Dynamic Braking Stops the 275 lb Flywheel in Under 10 Seconds.
    • Two Standard Flow and Two High Flow Eaton® Motor Confiuragtions Ensure Optimum Performance and Longevity.
    • Tall Push Bar at the Front Provides Rigidity and Helps Push Over Thick Brush and Trees.
    • Able to Cut Down to the GRound to Limit Regrowth.
    • Double-Sided, 5/8" x 5? Blades can be Flipped to Utilize Second Sharpended Edges.
    • Standard Replaceable Front Skid Shoes Increase the Mower Deck's Wear Life.
    • See the V40 Rotary Brush Cutter - Open Front for a Lighter Mower with a Smaller Cutting Capacity.
    • See the V60 Industrial Rotary Cutter for a More Robust Open Front Mower with a Larger Cutting Capacity.

    DO NOT OPERATE ROTARY BRUSH CUTTER WITHOUT A SHATTERPROOF CAB DOOR ON LOADER

    V50 ROTARY BRUSH CUTTER - OPEN FRONT DECK
    MODEL RBV60-O RBV66-O RBV72-O RBV78-O
    Cut Width 60.0 66.0 72.0 78.0
    Overall Cutter Width (Inches) 66.0 72.0 78.0 84.0
    Cutter Depth (Inches) 70.3 76.3 82.3 88.3
    Cutter Height (Inches) 21.4
    Deck Height (Inches) 7.3
    Push Bar Height (Inches) 20.4
    Minimum Cut Height (Inches) 2.0
    Cutting Capacity, Diamater
    (Inches)
    6.0
    Top Deck Thickness (Inches) 0.25'
    Side Deck Thickness (Inches) 0.25'
    Recommended Flow Rate (GPM) 14-25 Standard Flow, 25-42 High Flow
    Approximate Weight (Pounds) 1355 1465 1550 1625
    Recommended Loader Capacity Greater Than 1500 Pounds
    *Deck Material is Grade 50 Plate (50,000 PSI Minimum Yield Strength).
    *High Flow Motor Options Add Approximately 70 Pounds to Model Weight.
    The Data Refers to the Machine Without Options.
    Specifications & Designs Are Subject to Change Without Notice



    V60 Industrial Rotary Cutter

    V50 Rotary Brush Cutter - Floating Deck

    Open Front Skid Steer Brush Cutter Designed to Rough-Cut Thick Brush and Trees Up to 8" in Diameter.

    • Four-Blade Cutting System, Mounted to a Large Circular Flywheel, Ensures Flywheel Bounces Off Stumps Rather than Catching and Damaging Components.
    • Standard Dual Hydraulic Pressure Relief Valves with Dynamic Braking for Safety Stopping 550-610 lb. Flywheel in Under 15 Seconds.
    • One Standard Flow and Three High Flow Eaton® MOtor Confiurations Ensure Optimum Performance and Longevity.
    • Tall Push Bar at the Front Provides Rigidity and Helps Push Over Thick Brush and Trees.
    • Able to Cut Down to the Ground to Limit Tree Regrowth for Optimal Land Clearing.
    • 5/8" x 5" DOuble-Sided Blades can be Flipped to Utilize Second Sharpened Edges.
    • .
    • Standard Replaceable Front and Side Skid Shoes Increase the Mower Deck's Wear Life.
    • See the V40 Rotary Brush Cutter - Open Front for a Mower with a Smaller Cutting Capacity.

    V50 Rotary Brush Cutter - Floating Deck

    V50 Rotary Brush Cutter - Floating Deck

    V50 Rotary Brush Cutter - Floating Deck

    V50 Rotary Brush Cutter - Floating Deck

    DO NOT OPERATE ROTARY BRUSH CUTTER WITHOUT A SHATTERPROOF CAB DOOR ON LOADER

    MODEL V60 INDUSTRIAL ROTARY CUTTER
    MODEL IRC72 IRC78
    Cut Width 72.0. 78.0
    Overall Cutter Width (Inches) 78.0 84.0
    Overall Depth (Inches) 80.3 86.3
    Overall Height (Inches) 20.1
    Deck Height (Inches) 8.3
    Push Bar Height (Inches) 23.4
    Cut Height
    (Inches)
    2.3
    Cutting Capacity, Diameter (Inches) 8.0
    Top Deck Thickness (Inches) 0.25*
    Side Deck Thickness (Inches) 0.25*
    Recommended Flow Rate (GPM) 20-25 Standard, 20-42 High Flow
    Approximate Weight (Pounds) 2120 2280
    Recommended Loader Capacity Greater than 2200 Pounds
    *Deck Material is Grade 50 Plate (50,000 PSI Minimum Yield Strength).
    *High Flow Motor Options Add Approximately 70 Pounds to Model Weight.
    The Data Refers to the Machine Without Options.
    Specifications & Designs Are Subject to Change Without Notice