Sitrex Rotary Hay Tedders

The Sitrex Tedders are Ideal Machines to Spread, Air and Turn All Types of Forage in Any Type of Terrain. Due to the Number of Models Available and It's Versatility, the Sitrex Tedder has Been Used for Over 30 Years in Small and Large Farms and Has Been Found Efficient and Reliable.

The Tedder Allows a Perfect and Even Spreading of Forage. Tines Pick Up a Small Quantity of Forage on Every Turn Of the Rotor and Lay Forage On the Ground Perfectly Aired Without Damage or Dirt.

All Models Can be Supplied with Fixed Three Point Hitch or Towing Drawbar. The 4 Rotor Tedder is Also Available in a Hydraulic Version, with a Hydraulic Lift System on the Two Outer Rotors. The Hydraulic Tedder Version Allows the Operator to Put the Machine in Working or Transport Position Through the Tractor Hydraulic System.


1. Optional Kit to Convert the Manual Fold Tedder Into Hydraulic Version.


2. The Rotors are Driven by the Universal Joint. This System is Made of Press-Forged Steel Double Universal Joint.


3. Spring-Load Assist System Locked on Parking or Transport Position.


4. The Outer Mounted Impellers Automatically Follow the Uneveness of the Ground.


SITREX HAY TEDDER SPECIFICATIONS
MODEL RT-5200M RT-5200H RT-5800H
Arm of Impeller 6
Number of Impellers 4
Operating Speed 10 MPH
Power Required 25 HP
Transport Width 10'3" 11'
Tire Size 16 x 6.50-8
Weight 950 lbs. 1,000 lbs. 1,225 lbs.
Working Width 17' 19'

The ST 780H, 6 Rotor, Pull Type, Hydraulic Lift Tedder is the Ideal Machine to Spread, Air and Turn All Types of Forage on All Types of Rerrain. Obtains a Perfect and Even Spreading of Forage. All Operator's Controls are Hydraulically Carried Out from the Tractor Cab.

Our Tedder Allows a Working Width of 26' and 5" It Is the Answer to the Growing Demand of Modern and Efficient Tedders Suitable for Faster Work Rate in Large Areas. The Machine is Equipped with Wide-Angle Driveline that Allows an Angle of 80° to Turn Rapidly on Sharp Bends During Reversing. During Working the Carrier for Road Transport is Hydraulically Raised Over the Machine.

For Road Transport the Carrier is Lowered And at the Same Time the Outer Rotors are Raised to Reduce the Overall Width and Keep the Unit Lifted From the Ground. Furthermore, the Stability of the Machine During Working is Ensured by Tandem Axles with Balloon Tires Fitted Underneath the Center Rotors. Thus, the Stress is Evenly Distributed and the Tedder Follows the Undulations of the Ground.


SITREX ST-780H HAY TEDDER SPECIFICATIONS
Hydraulic Requirement 1,000 PSI
Width During Working Position 10'4"
Maximum Width 26'5"
Number of Arms per Rotor 6
Number of Rev's During Work 350 - 450 RPM
Power Required 50 HP
Rotors 6
Transport Tires 205/70-R15
Working Tires 16 x 6.50-8
Weight 2,470 lbs.
Width in Transport Position 9'6"
Working Width 25'7"
Specifications & Designs Are Subject to Change Without Notice