Loftness Flail Mowers


Loftness 3-Point Flail Mower
3-Point Flail Mower


Loftness Skid Steer Flail Mower
Skid Steer Flail Mower



Loftness 3-Point Flail Mowers

ADVANTAGES

  • Destroys and Mulches Grass or Weeds and Cuts Brush up to 3/4" in Diameter.
  • Mower Leaves an Even Mat of Mulch for Faster Decomposition.
  • Three Sizes to Choose From: 60", 72" & 90".
  • Mowers work with as low as 14 hp.
  • Note: 25 HP is recommended for tall weeds and intermittent brush.
  • Cuts Brush, Weeds or Grass with Same Knives.
  • Skid-steer Mounted Models Also Available.


FEATURES


  • 10 gage Steel Body.
  • Curved Hood for Improved Suction
  • 1-3/4" Rotor Bearings.
  • Structural Steel Frame.
  • Bearing Deflector Guard.
  • Steel Deflector Shields.
  • 1/4" Steel Endplate.
  • Heavy-duty Vented Belt Shield.
  • Adjustable Skid Shoes.
  • Rear Steel Deflector.
  • 0" to 4.5" Cutting Height.

  • Offsetable Hitch.
  • Line-shaft Support Bearing.
  • Full-width Adjustable Gage Roller.
  • 70 HP Gearbox.
  • 1-1/2" Roller Bearings.
  • 540 RPM PTO.
  • Roller Scraper.
  • Spring-loaded Belt Tightener.
  • Taper-lock Sheaves.
  • 3-Groove Banded Belt.


Heat-Treated Reversible Side-Slice Knives
2100 RPM, 110 MPH Knife Tip Speed


SPECIFICATIONS
  60M 72M 90M
Power Required 20 - 70 HP 25 - 70 HP 30 - 70 HP
Cutting Width 60" 72" 90"
Overall Width 72" 84" 102"
Weight 750 lbs. 850 lbs. 990 lbs.
Number of Knives 80 - 40 sets 96 - 48 sets 120 - 60 sets


Loftness Skid Steer Flail Mowers

ADVANTAGES

  • Front-mounted, Skid-steer Hydrostatic Drive.
  • Cuts Brush, Weeds or Grass with Same Knives.
  • Leaves an Even Mat of Mulch for Faster Decomposition.
  • Three Sizes to Choose From: 60", 72" & 90".
  • Mowers work with as little as 10 gpm. Note: 20+ gpm is recommended for tall weeds and intermittent brush.
  • Tractor-mounted Models Also Available (three-point hitch & 540 PTO required).


FEATURES


  • Universal Skid-steer Mount.
  • 10 gauge Steel Body.
  • Curved Hood for Improved Suction.
  • 1-3/4" Rotor Bearings.
  • Bearing Deflector Guard.
  • 1/4" Steel Endplate.
  • Adjustable Skid Shoes.
  • Structural Steel Frame.
  • 0" to 4.5" Cutting Height.
  • Steel Deflector Shields.
  • Heavy-duty Vented Belt Shield.
  • Support Bearing.

  • Directly Coupled Hydraulic Motor.
  • No Case Drain Needed.
  • All-welded Hitch.
  • Rear Steel Deflector.
  • 1-1/2" Roller Bearings.
  • Full-width Adjustable Gage Roller.
  • Roller Scraper.
  • Non-slip Safety Step.
  • Taper-lock Sheaves.
  • Spring-loaded Belt Tightener.
  • 3-Groove Banded Belt.


Cuts Grass or Weeds and Cuts up to 3/4" Diameter Brush with the Same Knives
Heat-Treated Reversible Side-Slice Knives
2100 RPM, 110 MPH Knife Tip Speed


SPECIFICATIONS
  60M 72M 90M
Flow Requirement 10 - 54 GPM 13 - 54 GPM 21 - 54 GPM
Cutting Width 60" 72" 90"
Overall Width 72" 84" 102"
Weight 750 lbs. 850 lbs. 990 lbs.
Number of Knives 80 - 40 sets 96 - 48 sets 120 - 60 sets