Loftness Skid Steer Mulcher & Tree & Brush Cutters

Loftness Skid Steer Mulcher/Tree & Brush Cutter
Mulcher/Tree
& Brush Cutter

Loftness Skid Steer Tree & Brush Shredder
Tree &
Brush Cutter

Loftness Skid Steer Timber Ax Tree & Brush Shredder
Timber AX
Tree & Brush Cutter



Loftness G2 Mulcher / Tree & Brush Cutter

NEW Generation 2!
Selectively cuts trees and brush without expensive hand labor. The material can be rough-cut or finely processed to fit your job requirements.

Works on a Minimum of 48 Hydraulic Horsepower
Aggressively cuts & mulches up to 6 inch diameter material with as little as 48 hydraulic horsepower. Intermittently cuts up to 10 inch or larger diameter material.
Note: Production rate will vary depending on the actual hydraulic horsepower available. A flow and pressure test is strongly recommended on your power unit before selecting a TimberAx model. Hydraulic Horsepower = Flow x Pressure x .90 ÷ 1714.

Loftness G2 Mulcher, Tree and Brush Cutter

The special body shape and hitch angle provide all the benefits of a moving door, without the hassle.

  • No need to add auxiliary valve and controls on skid-steer.
  • No extra cylinder and hoses.
  • No extra moving parts.

FEATURES

  • NEW - Body Design with Relocated Rotor.
  • NEW - Two-stage Cutting Chamber.
  • NEW - Counter Teeth in Cutting Chamber.
  • NEW - Built-in Recutter Bar at Discharge.
  • NEW - Optional Bolt-in 2nd Shear Bar.
  • NEW - Machined Bearing Anti-wrap.
  • NEW - Low Profile Skid Shoe.
  • NEW - Adjustable Tree-pusher Bar.
  • NEW - Welded Claw Hooks on Pusher Bar.
  • NEW - Redesigned Spiral Tooth Pattern.
  • NEW - Optional Carbide Planer Teeth.
  • NEW - Optional Cylinders on Pusher Bar.
  • Carbide Teeth with Forged Steel Holders.
  • Efficient Spiral Carbide Tooth Pattern.
  • Premium “HARDOX” Swedish Steel Housing.
  • Standard High-efficiency Gear-type Motor.
  • Optional High Pressure Piston-type Motor.
  • Dual Cross-over Relief Protection.
  • Heavy-duty, Bearing Block.
  • 1700 rpm - 17 inch Diameter Rotor.
  • 2-3/16" Rotor Bearings.
  • On Board PSI Gauge to Monitor Capacity.
  • Steel Deflector Chains.
  • 3-Groove Banded Belt.
  • Taper-lock Sheaves.
  • Spring-loaded Belt Tightener.
  • Skid Shoes - Adjustable 1 to 3 inches.
  • Diagnostic Kit (tachometer & pressure gauge).
  • Charcoal Grey Paint.
  • Hoses & Hose Holder are included.

Loftness Skid Steer G2 Brush and Tree Mulcher

Loftness Skid Steer G2 Brush and Tree Cutters

Loftness Skid Loader G2 Brush and Tree Mulchers

Loftness Skid Loader G2 Brush and Tree Cutters

Loftness Skidsteer G2 Brush and Tree Mulchers

Loftness Skidloader G2 Brush Mulcher

Loftness G2 Brush Mulcher Cutter Specifications

Like the original Carbide Cutter and the successful Timber AX, the New Generation 2 Carbide Cutter continues the tradition of using a shear bar in a contained cutting chamber to help process material. This efficient shearing action produces the finest mulch with the lowest horsepower requirement of any carbide mulching head.

The two-stage cutting action begins with the rotor picking up material and forcing it to pass between the moving carbide teeth and the stationary counter teeth. The staggered pattern and angles of the counter teeth promote an aggressive feeding action, while still minimizing the jamming that plagues competitive cutters. The partially reduced material is then trapped in the cutting chamber behind the front bumper. Here, the material is processed to a fine mulch as it passes between the carbide teeth and the recutter bar before being discharged toward the ground.

For special applications requiring extra fine mulching, an optional 2nd shear bar can be bolted to the row of counter teeth. This dual chipping action will process the material to the finest particle size of any carbide mulching head in the industry.

Loftness G2 Skid Steer Brush Mulcher


SPECIFICATIONS
  51CCHS 61CCHS
Width of Cut 51" 61"
Overall Width 68" 78"
Number of Carbides 30 36
Weight 2,145 lbs. 2,277 lbs.
Crated Weight 2,445 lbs. 2,577 lbs.
Model Selections Below 3500 PSI - All Require Case Drain.
29 - 32 GPM, 2500 - 3500 PSI 51CCHS2 06 61CCHS2 06
33 - 37 GPM, 2500 - 3500 PSI 51CCHS2 07 61CCHS2 07
38 - 42 GPM, 2500 - 3500 PSI 51CCHS2 08 61CCHS2 08
Hoses Included: 25 - 40 GPM 3/4" (-12 male o-ring, thread size 1-1/16")
*4000 PSI - Length of 102"
Model Selections Above 3500 PSI - All Require Case Drain.
27 - 31 GPM, 3500 - 6000 PSI 51CCHS4 26 61CCHS4 26
32 - 37 GPM, 3500 - 6000 PSI 51CCHS4 27 61CCHS4 27
Hoses Included: 3/4" (-12 male o-ring, thread size 1-1/16")
*4000 PSI - Length of 114"
*5000 PSI - Length of 108"
*Our hoses should fit most makes, however, you are responsible for checking the required length on your own machine. A 1/2” x 144” case drain hose will be provided (-8 male 0-ring, thread size 3/4”). Be sure to properly route hoses as described in the operator’s manual. Quick couplers for hoses are not included.
WARNING: Due to the possible danger of flying debris, impact-resistant shielding MUST be provided for the operator. The owner is responsible for providing operator-protection devices on the power unit.


Loftness Kwik Ax Tree & Brush Shredder

Loftness Kwik Ax Tree and Brush Shredders

NEW!! Special Alloy Knives
Improved Life & Reduced Sharpening!

The New Kwik Ax combines the fuel-efficient fixed, sharpened blades of the Timber Ax with the unique body design and downward rotation of the popular G2 Carbide Cutter.

This patented design offers lower power requirements, lower fuel consumption, less heat generated and less time spent on the job site.
Note: Production rate will vary depending on the actual hydraulic horsepower available. A flow and pressure test is strongly recommended on your power unit before selecting a TimberAx model. Hydraulic Horsepower = Flow x Pressure x .90 ÷ 1714.

Loftness Skid Steer Kwik Ax Tree and Brush Shredder
Mow Grass & Weeds

The original, Timber Ax rotates upward in front, picking up, literally, everything in its path. The material is processed between the sharpened blades and the adjustable shear bar, leaving a consistent particle size and a beautifully groomed job site.

Loftness Skidsteer Kwik Ax Tree and Brush Shredder
Eliminate Brush

The new Kwik Ax rotates down in front like the successful G2 Carbide Cutter, resulting in a very aggressive feed rate for all high production applications. Contractors involved with R.O.W. work need to keep moving forward as fast as possible, reducing vegetation to the ground level, without grooming the site.

Loftness Skid Loader Kwik Ax Tree and Brush Shredder
Mulch Branches or Prunings

The Kwik Ax, when needed, can also produce a very fine finished product by backdragging to reprocess the material on the ground.

Loftness Skidloader Kwik Ax Tree and Brush Shredder
Cut 6 to 10 inch Trees


FEATURES

  • NEW Downward Rotation Design.
  • Special Alloy, Sharpened Blades.
  • Hoses & Hose Holder are included.
  • Front-mounted, Hydraulic-driven.
  • Universal Skid-steer Mount.
  • Adjustable Tree-pusher Bar.
  • Claw Hooks on Pusher Bar.
  • Adjustable Shear Bar.
  • 1700 rpm - 17 inch Diameter Rotor.
  • Optional High Speed Rotor.
  • Rigid, Pocket-style Knife Mounts.
  • Premium Strength Steel Body & Rotor.
  • 2-3/16 inch Rotor Bearings.
  • Bearing Anti-wrap Protection.
  • Heavy-duty, Bearing Block.
  • Standard High-efficiency Gear-type Motor.
  • Optional High Pressure Piston-type Motor.
  • Dual Cross-over Relief Protection.
  • Pressure Gauge to Monitor Capacity.
  • Steel Deflector Chains.
  • 3-Groove Banded Belt.
  • Taper-lock Sheaves.
  • Spring-loaded Belt Tightener.
  • Skid Shoes - Adjustable 1 to 2 inches.
  • Diagnostic Kit.
  • Charcoal Grey Paint.


Loftness Skid Steer KwikAx Brush Mulcher
Produce a very fine finished product by backdragging the material on the ground.

Loftness Skid Loader KwikAx Brush Cutter
Cut 6 to 10 inch Trees


SPECIFICATIONS
MODEL 53QAH 63QAH 73QAH 83QAH
Width of Cut 53" 63" 73" 83"
Overall Width 71.5" 81.5" 91.5" 101.5"
Number of Knives 12 14 16 18
Weight 2,032 lbs. 2,218 lbs. 2,404 lbs. 2,590 lbs.
Crated Weight 2,415 lbs. 2,695 lbs. 2,775 lbs. 3,000 lbs.
Model Selections Below 3500 PSI - NO Case Drain.
22 - 24 GPM, 2500 - 3500 PSI 53QAH 04 63QAH1 04 73QAH1 04 83QAH1 04
Model Selections Below 3500 PSI - All Require Case Drain.
25 - 28 GPM, 2500 - 3500 PSI 53QAH2 05 63QAH2 05 73QAH2 05 83QAH2 05
29 - 32 GPM, 2500 - 3500 PSI 53QAH2 06 63QAH2 06 73QAH2 06 83QAH2 06
33 - 37 GPM, 2500 - 3500 PSI 53QAH2 07 63QAH2 07 73QAH2 07 83QAH2 07
38 - 42 GPM, 2500 - 3500 PSI 53QAH2 08 63QAH2 08 73QAH2 08 83QAH2 08
Hoses Included 3/4 inch (-12 male o-ring, thread size 1-1/16”)
*4000 psi - Length of 102”
Model Selections Above 3500 PSI - All Require Case Drain.
28 - 34 GPM, 3500 - 5000 PSI 53QAH5 30 63QAH5 30 73QAH5 30 83QAH5 30
Hoses Included 3/4" (-12 male o-ring, thread size 1-1/16”)
*5000 PSI - Length of 108”
*Our hoses should fit most makes, however, you are responsible for checking the required length on your own machine. A 1/2” x 144” case drain hose will be provided (-8 male 0-ring, thread size 3/4”). Be sure to properly route hoses as described in the operator’s manual. Quick couplers for hoses are not included.
WARNING: Due to the possible danger of flying debris, impact-resistant shielding MUST be provided for the operator. The owner is responsible for providing operator-protection devices on the power unit.


Loftness Timber Ax Tree & Brush Shredder

Loftness Skid Steer Timber Ax Tree and Brush Shredder

NEW!! Special Alloy Knives
Improved Life & Reduced Sharpening!

The revolutionary reverse rotation design lifts material off the ground, improving the cutting action with one single pass, reducing horsepower requirements and knife wear or damage. Competitive models using forward turning rotors with fixed carbide or swinging hammers, drive uncut material into the soil with no chance to recut for finer mulching.

Loftness Skid Steer Timber Ax Tree and Brush Mulchers

Efficiently cuts and mulches up to 6 inch diameter material with as little as 38 hydraulic horsepower. Intermittently cuts up to 12 inch or larger diameter material.

Loftness Skidsteer Timber Ax Tree and Brush Cutters

Selectively cuts and mulches any unwanted trees or brush. Cuts trees, brush, vines or grass with the same knives. Reduces job site clean-up and impact on terrain.

Loftness Skid Loader Timber Ax Tree and Brush Mulchers

Nine hydraulic motors to choose from, 22-54 GPM to perfectly match your skid-steer's system.


Before & After

Note: Production rate will vary depending on the actual hydraulic horsepower available. A flow and pressure test is strongly recommended on your power unit before selecting a TimberAx model. Hydraulic Horsepower = Flow x Pressure x .90 ÷ 1714.

FEATURES

  • NEW - Hoses & Hose Holder are included.
  • Front-mounted, Hydraulic-driven.
  • Universal Skid-steer Mount.
  • Adjustable Tree-pusher Bar.
  • Claw Hooks on Pusher Bar.
  • Adjustable Shear Bar.
  • 1700 rpm - 17 inch Diameter Rotor.
  • NEW Special Alloy, Sharpened Blades.
  • Rigid, Pocket-style Knife Mounts.
  • Premium Strength Steel Body & Rotor.
  • 2-3/16 inch Rotor Bearings.
  • Bearing Anti-wrap Protection.
  • Heavy-duty, Bearing Block.
  • Standard High-efficiency Gear-type Motor.
  • Optional High Pressure Piston-type Motor.
  • Dual Cross-over Relief Protection.
  • Pressure Gauge to Monitor Capacity.
  • Steel Deflector Chains.
  • 3-Groove Banded Belt.
  • Taper-lock Sheaves.
  • Spring-loaded Belt Tightener.
  • Skid Shoes - Adjustable 1 - 3 inches.
  • Spare Parts Kit.
  • Tachometer.
  • Charcoal Grey Paint.

Loftness Skid Steer Timber Ax Tree Shredder
The material is pulled in between the blades and the adjustable shear bar processes it to a consistent particle size.

Loftness Skidsteer Timber Ax Tree Shredders
Claw Hooks on Tree Pusher Bar

Loftness Skid Loader Timber Ax Brush Mulchers
Adjustable re-cutter bar gauges gap between knives and bar. Anti-wrap deflectors feed material into knives and protect bearings.

Loftness Skidloader Timber Ax Tree Mulchers
Blades can be sharpened on the machine.

Loftness Skid Steer Timber Ax Brush Tree Mulchers
3-groove banded belts with spring-loaded idler and taper-lock sheeves.

Loftness Skid Steer Timber Ax Brush Mulchers
Relief valve protected, heavy-duty, hydraulic motor with external bearing block to support side-load from belt tension.

Loftness Timber Ax Mulchers
Rubber-mounted pressure gauge for monitoring performance.


SPECIFICATIONS
MODEL 53AX 63AX 73AX 83AX
Width of Cut 53" 63" 73" 83"
Overall Width 71.5" 81.5" 91.5" 101.5"
Number of Knives 12 14 16 18
Weight 1,9202 lbs. 2,350 lbs. 2,416 lbs. 2,565 lbs.
Crated Weight 2,415 lbs. 2,695 lbs. 2,775 lbs. 3,000 lbs.
Model Selections Below 3500 PSI - NO Case Drain.
22 - 24 GPM, 2500 - 3500 PSI 53AXH1 04 63AXH1 04 73AXH1 04 83AXH1 04
Model Selections Below 3500 PSI - All Require Case Drain.
22 - 24 GPM, 2500 - 3500 PSI 53AXH2 04 63AXH2 04 73AXH2 04 83AXH2 04
25 - 28 GPM, 2500 - 3500 PSI 53AXH2 05 63AXH2 05 73AXH2 05 83AXH2 05
29 - 32 GPM, 2500 - 3500 PSI 53AXH2 06 63AXH2 06 73AXH2 06 83AXH2 06
33 - 37 GPM, 2500 - 3500 PSI 53AXH2 07 63AXH2 07 73AXH2 07 83AXH2 07
38 - 42 GPM, 2500 - 3500 PSI 53AXH2 08 63AXH2 08 73AXH2 08 83AXH2 08
Hoses Included: 25-40 GPM 3/4" (-12 male o-ring, thread size 1-1/16”)
*4000 PSI - Length of 102”
Model Selections Above 3500 PSI - All Require Case Drain.
27 - 31 GPM, 3500 - 6000 PSI 53AXH4 26 63AXH4 26 73AXH4 26 83AXH4 26
32 - 37 GPM, 3500 - 6000 PSI 53AXH4 27 63AXH4 27 73AXH4 27 83AXH4 27
Hoses Included: 25-40 GPM 3/4" (-12 male o-ring, thread size 1-1/16”)
*5000 psi - Length of 108”
*Our hoses should fit most makes, however, you are responsible for checking the required length on your own machine. A 1/2” x 126” case drain hose will be provided (-8 male 0-ring, thread size 3/4”). Be sure to properly route hoses as described in the operator’s manual. Quick couplers for hoses are not included.
WARNING:Due to the possible danger of flying debris, impact-resistant shielding MUST be provided for the operator. The owner is responsible for providing operator-protection devices on the power unit.