H & S Model 425 Hydraulic Push Manure Spreader

The H & S Model HP425 Hydraulic Push Manure Spreader features a super fast unload rate of 31 seconds at 15 GPM, poly bonded floor and a heavy duty frame to ensure strength and long life.

Model HP425 Hydraulic Push Manure Spreader with horizontal beaters.

Horizontal Beater Models feature a top beater as standard equipment and are shear bolt protected at the front PTO assembly. Beater blades are replaceable and the beater assembly is removable for stockpiling manure.

The beaters are driven by the HP's unique center drive system. #80 Chains are used for strength and long life. Easy open shields makes lubing of chains easy.

Heavy duty rectangular tubing is used for the pole and frame to ensure strength and long life. Structural channel floor supports spaced 8" apart are used for maximum floor support. Weight is distributed over the axles with 3" diameter stress proof spindles inserted into a sleeve.

The HP's PTO beater drive system consists of a straight shaft off the PTO underneath the center of the manure spreader to an angle gearbox in the rear, and over to the beater drive sprocket.

All hydraulic push models use solid virgin grade poly with UV inhibitor, (HMWPE) for the floor and sides allowing less friction. The hydraulic endgate has 2 cylinders with 3/8" hose and pipe for faster operation in cold weather.

The H & S hydraulic push-off system on all models features a hydraulic variable speed control and two hydraulic cylinders that sequence to reduce push-off forces and fast unloading of material.

All models feature a variable speed control.


MODEL 425 SPECIFICATIONS
Capacity - Old Rating 425 BU
Capacity Cu. Ft. Struck Level 270
Side Loading Height 61-1/4"
2nd or Vertical Beater Height 74-3/4"
Height - Top of Hyd. End Gate (w/o Hook) 65"
Inside Width 72"
Inside Length 16"
Inside Depth 34"
Overall Width with Tires 10'2"
Overall Length 26'5"
Standard Number of Beaters 2
Horizontal Beater Diameter/Lower 29"
Horizontal Beater Diameter/Upper 20"
Replaceable Beater Paddles Yes
Removeable Beater Assembly Yes
Standard PTO Speed 540 RPM
Optional PTO Speed 1000 RPM
PTO Overload Protection Shear Bolt
Hydraulic Push Unload Rate @ 15 GPM 31 Seconds
Hydraulic Push Cylinder Diameter 3-1/2"
Hydraulic Push Cylinder Hose Diameter 3/8"
Hub 8 Bolt
Spindle Size 3"
Tire Size 385 x 22.5
Hydraulic End Gate/Jack/Wood Side Rails Standard
Cylinders on Hydraulic End Gate 2 W-3/8" Hose
Rear Pan Optional
Weight with Tires 7,000 lbs.
SEE OPERATORS MANUAL FOR WARRANTY DETAILS AND LIMITATIONS. H&S RESERVES THE RIGHT TO CHANGE ITS PRODUCTS OR THE DESCRIPTION AT ANY TIME WITHOUT NOTICE OR OBLIGATION. MODELS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.