H & S X13 X-Rake
$Call For Our "Below List Prices!"
The H & S X13 Rake Features a No Caster Wheel Design, Short Turning Radius, and an Overhead Frame Design for High Volume Capacity.
| | Home | Haying Equipment | H & S Hay Rakes | | We ship nationwide affordably ! |
|
H & S X13 X-Rake $Call For Our "Below List Prices!" |
|
The H & S X13 Rake Features a No Caster Wheel Design, Short Turning Radius, and an Overhead Frame Design for High Volume Capacity. |
|
|
The X13 has 100% coverage, there is no need for center kicker wheels. The 3 Wheel Extension can be locked up if not needed. All models of the X Series Rakes also feature one side raking with either side. |
|
|
The variable main frame width adjustment opens symmetrically. Hitch height and beam fore and aft tilt are easily controlled by a ratchet jack. |
|
|
X-Series Rakes have a seven position easy adjustable beam angle as standard equipment. |
|
|
Like all H & S Rakes, the X-Series rakes have a proven ground pressure system and rake arm design. |
|
|
The optional Hydraulic Beam Angle Kit (A) adjusts right and left beam angles. Tandem ST175/80D13 Tires with Rims (B) are standard equipment on the X-13. |
|
|
Toggle Switch up adjusts left beam angle. Toggle Switch neutral adjusts main frame width. Toggle Switch down adjusts right beam angle. |
|
|
An Optional Rake Wheel Wind Board helps to keep the crop from wrapping on the rake wheels. |
|
|
X-Rake Configurations. |
|
|
|
| X13 X-RAKE SPECIFICATIONS | |||
| Wheel Diameter | 55" | ||
| Teeth per Wheel | 40 | ||
| Tooth Diameter | 7.0 mm (.275") | ||
| Transport Width | 10'4" | ||
| Transport Length | 28'4" | ||
| Windrow Width Adjustment | Up to 46" | ||
| Raking Width | Up to 22' | ||
| Raking Wheel Hubs | Tapered Roller Bearings | ||
| Hitch Jack | Standard | ||
| Standard Transport Wheels | (4) - Tandem (ST175/80D13) | ||
| Optional Transport Wheels - Tandems | N/A | ||
| Weight | 2,798 lbs. | ||
| Rake Wheel Wind Guards | Optional | ||
| Transport Lights | Optional | ||
| Horsepower Requirements | 40 (30 Kw) | ||
| Hydraulic Requirements | 1 Double Acting Remote for Main Frame Open and Close 1 Single Acting Remote for Rake Wheel Lift |
||
| Electrical Requirements | Plus 12 Volt Power Source if Rake is Equipped with the Hydraulic Beam Angle Kit. | ||
WARRANTY: SEE OPERATORS MANUAL FOR WARRANTY DETAILS AND LIMITATIONS. H&S RESERVES THE RIGHT TO CHANGE ITS PRODUCTS OR THE DESCRIPTION AT ANY TIME WITHOUT NOTICE OR OBLIGATION. MODELS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
|
Iowa Farm Equipment Copyright © 2004 - 2008 by Iowa Farm Equipment |
