H & S HDX-19 Hay Rake
$Call For Our "Below List Prices!"
The H & S HDX Series Rakes feature a highly maneuverable short turning radius, no caster wheel design, and an overhead frame design for high volume capacity of crop.
| | Home | Haying Equipment | H & S Hay Rakes | | We ship nationwide affordably ! |
|
H & S HDX-19 Hay Rake $Call For Our "Below List Prices!" |
|
The H & S HDX Series Rakes feature a highly maneuverable short turning radius, no caster wheel design, and an overhead frame design for high volume capacity of crop. |
|
|
Two Turnbuckle Adjustments (B) on the support rods of each rake beam adjust to keep the rake beam level. |
|
|
Each rake beam adjstment (A) for the rake wheel ground pressure allowing the operator to fine tuen for various conditions. |
|
|
A five position manual adjustment beam angle is standard equipment. |
|
|
Like all H & S Rakes, the HDX-Series Rakes have a proven ground pressure system and rake arm design. The X-19 Rake has 100% coverage, there is no need for center kicker wheels. The 3-wheel extension can be locked up if needed. All models of the HDX Series Rakes also feature one side raking with either side. |
|
|
The variable main frame width adjustment open symmetrically. Hitch height and beam fore and aft tilt are easily controlled by a ratchet jack (C). |
|
|
Tandem 6.70 x 15 Tires with Rims (D) are standard equipment. The optional Hydraulic Beam Angle Kit (E) adjusts right and left beam angles. |
|
|
Toggle Switch up adjusts left beam angle. Toggle Switch neutral adjusts main frame width. Toggle Switch down adjusts right beam angle. |
|
|
Optional Rake Wheel Wind Boards help to keep the crop from wrapping on the rake wheels. |
|
|
HDX-Rake Configurations. |
| HDX-19 HAY RAKE SPECIFICATIONS | |||
| Wheel Diameter | 60" | ||
| Teeth per Wheel | 40 | ||
| Tooth Diameter | 7.0 mm (.275") | ||
| Transport Width | 12'5" | ||
| Transport Length | 37'7" | ||
| Windrow Width Adjustment | Up to 94" | ||
| Raking Width | Up to 34'6" | ||
| Raking Wheel Hubs | Tapered Roller Bearings | ||
| Hitch Jack | Standard | ||
| Standard Transport Wheels | (4 - Tandem) 6.70 x 15 | ||
| Weight | 4,800 lbs. | ||
| Rake Wheel Wind Guards | Optional | ||
| Transport/Work Lights | Optional | ||
| Hydraulic Requirements | 1 Double Acting Remote for Main Frame Open and Close 1 Single Acting Remote for Rake Wheel Lift |
||
| Electrical Requirements | Plus 12 Volt Power Source if Rake is Equipped with the Hydraulic Beam Angle Kit. | ||
WARRANTY: SEE OPERATORS MANUAL FOR WARRANTY DETAILS AND LIMITATIONS. H&S RESERVES THE RIGHT TO CHANGE ITS PRODUCTS OR THE DESCRIPTION AT ANY TIME WITHOUT NOTICE OR OBLIGATION. MODELS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
|
Iowa Farm Equipment Copyright © 2004 - 2008 by Iowa Farm Equipment |
