Iowa Farm Equipment -- H & S 7 + 4 Front and Rear Unload Forage Boxes

We ship nationwide affordably !

H & S 7 + 4 Front and Rear Unload
Forage Boxes

$Call For Our "Below List Prices!"

The HD 7 + 4 Front and Rear Unload Boxes have the option of being ordered with PTO Rear Drive or Hydraulic Rear Drive. The box has a standard PTO Drive while unloading off the front. Front Hydraulic Drive is optional.

	3 - 18" 4 Bar HD Spiral Type Beaters H & S uses three - 18" 4 Bar HD Spiral Type Beaters - not Augers. Aggressive in handling tough material, they are even feeding. All three beaters are mounted in the head, not auxiliary panels in the box. Beater shafts are 1-1/4" equipped with greaseable bearings.
	Optional Folding Cross Conveyor An optional 12" Folding Cross Conveyor Extension is available for apron unload models.
	Variable Speed Drive A simple trouble-free variable speed drive lets you match just the right unload speed to the crop type, load condition and blower capacity. A bronze worm gear is standard. #80 Drive chain drives the main apron drive shaft. The main apron drive shaft is 1-3/4" stress proof shafting. Main apron unload rate is variable and ranges from 9" up to 12'6" per minute.
	Clear Beaters Before You Start Main Apron A separate clutch allows you to start and clear the beaters before you start the main apron conveyors. The HD Clutch can be used to engage just the cross conveyor, the cross conveyor and beaters, or the cross conveyor, beaters and main floor apron in any speed.
	Dual Belt Clutch Shields are removed to show the dual belt clutch which is the primary drive source. The emergency stop mechanism is built into the drive unit and can be activated from the front, sides or rear of the box.
	Steel-Welded Subframe H & S Boxes have an all steel-welded subframe.
	Drive Lock Pin When being used as a front unload box, the drive lock pin is locked into the main apron drive sprocket.
	Switch Front Front to Rear Unload Easily To switch to rear unload simply remove the drive lock pin from the front and insert it into the Rear Apron Drive Sprocket. A 3 Shaft System (Drive, Tightener and Idler Shafts) maintain proper chain tension and positive drive.
	Self Locking Tailgate Once the Tailgate Safety Lock is released, the self-locking mechanism unlocks automatically while unloading and locks shut when the tailgate closes.
	Transport Lights Standard Transport Lights are standard on all H & S Boxes. This is the light configuration on the front unload boxes.
	Optional Front Hydraulic Drive All front unload boxes have a standard PTO Drive while unloading off the front. Front hydraulic drive is optional.

SPECIFICATIONS
MODEL	FB74FR16	FB74FR18	FB74FR20	FB74FR22
Capacity with Roof	852 ft-3	1,003 ft-3	1,095 ft-3	---
Inside Width	7'4"
Inside Height	93"	97"
Overall Length	19'3"	21'3"	23'3"	---
Overall Width	107"			---
Overall Height (Bolster to Roof)	114"	118"
Weight	4,770 lbs.	5,170 lbs.	5,570 lbs.	---
Main Apron Chain	667H Pintle - 10,000# x 4 - T-Rod Not Available
Cross Feed	22" Wide - CA550 Chain with Welded Slats Right or Left Hand Discharge
Unloading Beaters	3 - 18" - 4 Bar Spiral - Even Feed
Main Apron Speed	Variable Speed Drive - Unload Rate - 9" Per Min. up to 12'6" Per Min.
Drive Sequence	Durst A110 Bronze Worm Gear Box - 80# Roller Chain - 1-3/4" Stress Proof Main Apron Drive Shaft
Power Source	540 PTO or Hydraulic Drive
Emergency Stop Clutch	Standard
Options	12" Folding Bunk Extension
Transport Lights	Standard
Rear Unload Drive	Hydraulic Drive or PTO Drive
Rear Unload Speed	Unload Time is Dependent on Tractor RPM, Hydraulic Pressure and GPM
Rear Endgate	Automatic Lock and Unlock

WARRANTY: SEE OPERATORS MANUAL FOR WARRANTY DETAILS AND LIMITATIONS. H&S RESERVES THE RIGHT TO CHANGE ITS PRODUCTS OR THE DESCRIPTION AT ANY TIME WITHOUT NOTICE OR OBLIGATION. MODELS AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.

Iowa Farm Equipment
2491 122nd St.
Moscow, Iowa 52760
563-724-3500
sales@iowafarmequipment.com