FFC Skid Steer Mount Brush & Scrap Grapples


BRUSH GRAPPLE

  • 6" Tine Spacing.
  • Standard Cylinder Guards Protect All Cylinder Components.
  • 1-1/4" Cylinder Pivot Pins.
  • 1-1/4" x 24" Patented Grapple Pins Greatly Reduce Torsional Force.
  • 3/8" End Plates on Utility Grapple and 1/2" End Plates on Construction Grapple.
  • Patented Cushioned and Sleeved Cylinders are 2" x 8" x 1-1/4".
  • Standard Load Check Valve.
  • 1000,000 PSI Yield Strength Tine Material.

SCRAP GRAPPLE

  • Bucket Edge Drilled for FFC Replaceable Ddge Unless Specified.
  • Standard Cylinder Guards Protect All Cylinder Components.
  • 1-1/4" Cylinder Pivot Pins.
  • 1-1/4" x 24" Patented Grapple Pins Greatly Reduce Torsional Force.
  • 3/8" End Plates on Utility Grapple and 1/2" End Plates on Construction Grapple.
  • Patented Cushioned and Sleeved Cylinders are 2" x 8" x 1-1/4".
  • Standard Load Check Valve.


SPECIFICATIONS
  BRUSH GRAPPLES - UTILITY MODELS SCRAP GRAPPLES - UTILITY MODELS
Overall Width 66-3/4" 72-3/4" 60-3/4" 66-3/4" 72-3/4"
Grapple Open 17-3/8" 34"
Grapple Closed 29" 19-3/4"
Overall Depth 36"
Weight 740 lbs. 775 lbs. 738 lbs. 788 lbs. 835 lbs.
Number of Tines 12 14  


SPECIFICATIONS
  BRUSH GRAPPLES - CONSTRUCTION MODELS SCRAP GRAPPLES - CONSTRUCTION MODELS
Overall Width 73" 79" 85" 91" 77" 83" 89"
Grapple Open 40"
Grapple Closed 16-1/2" 20"
Overall Depth 39" 38"
Weight 925 lbs. 999 lbs. 1,054 lbs. 1,105 lbs. 1,081 lbs. 1,133 lbs. 1,180 lbs.
Number of Tines 14 16  
Specifications & Designs Are Subject to Change Without Notice and Without Liability Therefore.
Whenever Applicable Specifications are in Accordance with SAE Standards.