Iowa Farm Equipment -- Erskine Skid Steer Grapples


\| Home \| Skid Steer Attachments \| Arbor, Forestry & Logging Equipment \| Grapples & Hydraulic Rotators \| Contact Us \|

Erskine Skid Steer Grapples

Log Grapple	Industrial Grapple Rake	Brush & Rock Grapple

Erskine Skid Steer Log Grapple

Grab It Now...

Landscapers, contractors, tree services, wood processors and farmers boost productivity - great for moving trees, boulders and large wood piles. With the Universal Grab, trees and debris can be delicately removed, repositioned, or loaded without damaging the surrounding landscape. This product is ideal for moving logs, log skidding, rocks, brush or other multiple uses.

Rugged, heavy-duty design.
Rigid quality control during manufacturing ensures greater reliability.
Powder coated finish for best protection and appearance.
55" Wide opening.

Grapple pivots up to 135 degrees in either direction for easy maneuvering; locks at 90 degrees for convenient side loading.

SPECIFICATIONS
Weight	650 lbs.
Size	34.5" x 31.5" x 81"
Operating Pressure	Hydraulic System Rated at 3000 PSI Maximum
Grapple Arms	1/2" Steel Fingers 3/8" Steel Stiffners
Grapple Opening	55" ID Maximum Opening
Capacity	4" - 36" Object Diameter
Lifing Capacity	Up to 2,000 ft.
OPTIONS
Factory Installed Faster Flat-Faced Couplers Factory Installed Parker Flat-Faced Couplers

Erskine Skid Steer Industrial Grapple Rake

The Possibilities are Wide Open...

The most versatile tool in your attachment arsenal. The strength of the Grapple Rake allows you to pick up a variety of debris, from logs and brush to rocks and concrete. The quality and strength of the T-1 steel used throughout gives you a grapple rake that will withstand the toughest demands. It’s 48” opening and powerful jaws will close, clamp and hold virtually anything.

Our universal Quick Attach Plates fit most skid steers.
T-1 steel teeth nearly three times stronger than regular steel.
2 - 3,000 lb. hydraulic cylinders.
Opens to 48”.
Curved teeth allow the grapple to glide over the ground,raking and cleaning the surface without damaging it.
Clear brush, pick rocks and mulch.
Raking & piling, storm cleanup... demolition.
Use as a root rake.
Excellent for backdragging.
Grapple encloses totally and positively secures debris.

Reinforcement between teeth is structurally engineered for maximum strength. Ideal spacing allows unwanted debris to fall through.

Two powerful heavy-duty 3,000 lb. cylinders are protected from any material that may cause damage.

Greaseable pivot points & hinges.

Gathers & piles brush as well as limbs & logs. Our unique design allows for vertical pick-up & dumping of debris.

Can be used to remove concrete from demolition sites or can be used to move rock for landscaping applications.

Grabs logs one at a time, or multiple logs for quick
clearing of the job site.

Utilize Grapple for logging, loading trucks and/or trailers.

Gather brush or debris for quick removal.

Use rake for gathering...or sink teeth in the ground for digging out roots or rock.

Ideal for backraking & leveling of your site.
Pulls material into pile for quick, easy cleanup.

SPECIFICATIONS
	60"	72"	88"
Weight	830 lbs.	920 lbs.	1,030 lbs.
Width	60-1/2"	72-1/2"	88-1/2"
Width Between Teeth (Average)	7-1/2"
Height with Teeth Closed	36.42"
Maximum Height with Teeth Open	46.34"
Maximum Opening	48"
Grapple Teeth (Upper)	7	9	11
Grapple Teeth (Lower)	8	10	12
3000# Hydraulic Cylinders	2
Steel Construction of Teeth	T-1
OPTIONS
Factory Installed Faster Flat-Faced Couplers Factory Installed Parker Flat-Faced Couplers

Erskine Skid Steer Heavy Duty
Brush & Rock Grapple

Hold On Tight...

This grapple is designed for the most powerful skid steers. The strength of this heavy duty grapple allows you to move the most massive loads with ease. Simply put, this is one of the strongest, finest built, most versatile grapples built in the entire industry.

Designed for the most powerful skid steers.
Our universal Quick Attach plates fit most skid steers.
T-1 steel tines with 46” opening.
Two - 3,000 lb. cylinders.
Replaceable teeth.
Close tighter than most conventional grapples.
Root rake, clears brush, large logs, rocks, demolition.
Curved teeth glide over the ground, raking and cleaning the surface without damaging it.
Unique lower teeth for better gripping.

Unique serrated edges provide grip to keep items from rolling out.

Gussetted between teeth for added strength.

SPECIFICATIONS
	72"	84"
Weight	1,050 lbs.	1,200 lbs.
Width	74.13"	86.13"
Width Between Upper Teeth (Average)	12"	12"
Width Between Lower Teeth (Average)	10.53"	10.53"
Height with Teeth Closed	37.74"	37.74"
Maximum Height with Teeth Open	53.58"	53.58"
Maximum Opening	46"	46"
Grapple Teeth (Upper)	8	9
Grapple Teeth (Lower)	7	8
3000# Hydraulic Cylinders	2	2
Steel Construction of Teeth	T-1	T-1
OPTIONS
Factory Installed Faster Flat-Faced Couplers Factory Installed Parker Flat-Faced Couplers