Dougherty Excavator Tree Saw

Durable, Versatile & Lightweight, the Excavator Model Mates Onto Any Mini Excavator Under 25,000 lbs. This Model Utilizes the Mini Excavator's Flexibility While Maximizing Performance with a Cutting Rate of 3"-6" per Second. The Excavator Model Has a 30" Blade with Carbide Teeth, Weight Only 600 lbs. & Has a Lifetime Frame Warranty.

This Model is Ideal For:

  • Cleaning Fence Rows.
  • Cleaning out Undergrowth Vegetation.
  • Trimming Limbs.

Dougherty Excavator Tree Saws


SAFETY FEATURES

Safety is a Primary Concern of Dougherty Forestry Mfg. Each Turbo Saw Has More Standard Safety Features Than the Competition. The Operator's Manual is Contained within a Waterproof Canister on the Skid Steer for Easy Access.

BLADE SHIELD
A Shield Behind the Blade Prevents Sawdust from Being Directed Towards the Operator.


FRAME DESIGN

All Primary Hydraulic Hoses & Electric Leads are Hidden Within the Frame of the Turbo Saw to Prevent Damage from Limbs & Debris. Bulkhead Fittings are Used Where the Hoses Pass Through the Frame to Limit Wear. The Hoses from the Excavator to the Attachment are Covered with a Sleeve for Wear & Safety.


PUSHING GUARD

The Pushing Guard Above the Cutting Disc Gives the Operator Valuable Leverage Against Limbs So They Will Fall Forward, Away from the Operator.

ROTATING HEAD
The Unit Has a Manually Rotating Cutting Head for Vertical Cutting.


CUTTING FORCE

DRIVETRAIN
There is No Maintenance or Adjustment on the Drive Train for Up to 800 to 1200 Hours. The Hydraulic Motor Has a Spline Output That Mates Directly with a Heavy Duty Bearing Block. The Frame of the Excavator Saw Has an Anti-Wrap Feature to Prevent Twine or Vines From Wrapping Around the Drive Shaft.

HIGH SPEED CUTTING DISC
The Cutting Disc on the Excavator Saw Turns at 2,000 RPM. This Allows the Excavator Saw to Effectively Trim Small Limbs as Well as Larger Branches. The Teeth Have an Aggressive Cutting Angle & a Limited Bite, Which Increase Efficiency, Multiply Available Power & Minimize Chip Size for Safety. This Speed Allows the Turbo Saw to Cut Brush as Well as Trees. A Hardened, Machined Skid Plate is Placed Beneath the Cutting Disc to Protect the Fasteners During Contact.

TS3 CUTTING TOOTH
The TS3 Cutting Tooth Has Been Developed Out of Mining Grade Carbide, Allowing for Ground Contact. The Tooth Can be Rotated Three Times & Has a 200 - 500 Hour Tooth Life. The Operating Cost is Well Below Competing Attachments at Under $0.69 per Hour. The Teeth Can be Rotated or Replaced Easily in the Field Using Hand Tools.


SPECIFICATIONS
MODEL HYD. REQUIREMENTS LENGTH HEIGHT WEIGHT BLADE DIAMETER CUTTING SPEED
DFM26EXR 15 - 23 GPM 61" 21" 555 lbs. 30" 3"-6" Per Second
Specifications & Designs Are Subject to Change Without Notice