Dougherty Compact Feller Buncher
for Skid Steers & Compact Loaders

Dougherty Compact Loader Feller Buncher

Dougherty's Compact Feller Buncher Cuts Up to a 16" Tree & Features the TS3 Cutting System. The TS3 Cutting System Guarantees Maximum Productivity & a Low Operating Cost. The Compact Feller Buncher CFB16 Also Comes with Features that Reduce Maintenance Like Cushioned Cylinders & 1.5" Pivot Pins. The CFB16's Easy Plug & Play Controls Make This Feller Buncher Ready for Work Upon Delivery. The Compact Feller Buncher is an Excellent Tool for Forestry Tree Cutting Where Space is Limited & Vegetation Needs to be Preserved.

Dougherty Compact Loader Feller Buncher Features

FEATURES

  • High Speed Cutting Disc.
  • Up to a 16” Diameter Cutting Capability Accumulator Included.
  • Cushioned Cylinders.
  • Requires 21-45 GPM Hydraulic System Plug & Play Controls.
  • Increased Tilt-Back Angle.

The CFB16 Series Compact Feller Buncher for Compact Track Loaders Gives Loggers a New Tool for Thinning & Harvesting Applications. This Attachment Will Cut Up to a 16" Diameter Trunk & Comes with a Standard Accumulator to Harvest Multiple Smaller Trunks. The CFB16 Series Has a Self-Contained, Plug & Play Hydraulic Circuit. The Cutting Disc, Holding Arms & Accumulator Operate Off a Single Set of Hydraulics. Spool Up & Shut Down Time of the Cutting Disc is Under 5 Seconds for Maximum Safety. The Main Tower Constructed from 1/2" & 3/8" Steel Giving Maximum Strength Without Excess Weight.

Dougherty Feller Buncher for Compact Loader

Dougherty Forestry's Cut & Carry Saw (CFB11) Cuts Up to an 11" Tree & Features a TS3 Cutting System. The TS3 Cutting System Guarantees Maximum Productivity & a Low Operating Cost. The CFB11 Also Comes with Features That Reduce Maintenance Like Cushioned Cylinders & 1.5" Pivot Pins. The CFB11's Easy Plug & Play Controls Make This Feller Buncher Ready for Work Upon Delivery Where Space is Limited & Vegetation Needs to be Preserved.

Dougherty Feller Buncher for Skid Steer

FEATURES

Dougherty TS3 Cutting Tooth for Compact Feller Buncher

TS3 CUTTING TOOTH:
The TS3 Cutting Tooth Has Been Developed Out of Mining Grade Carbide, Allowing for Ground Contact. The Tooth Can be Rotated 3 Times & Has Up to 500 Hours of Tooth Life. The Operating Cost is Well Below Competing Attachments at Under $0.69 per Hour. The Teeth Can be Rotated or Replaced Easily in the Field Using Hand Tools.

New TS3 Cutting System Features:

  • Larger Bolt Shank.
  • Countersunk Lock Washer (No Loctite Needed).
  • Bigger 1/2 Hex Head Bolt

High Speed Cutting Disc:
The Cutting Disc on the TurboSaw Turns at 1,800 RPM, Allowing the TurboSaw to Cut Brush as Well as Trees. The Teeth Have an Aggressive Cutting Angle & a Limited Bite, Which Increases Efficiency, Multiplies Available Power & Minimizes Chip Size for Safety. This Speed Allows the TurboSaw to Cut Brush as Well as Trees. A Hardened, Machined Skid Plate is Placed Beneath the Cutting Disc to Protect the Fasteners During Ground Contact.

Drive Train:
There is No Maintenance or Adjustment on the Drive Train for Up to 800 to 1200 Hours. The Hydraulic Motor Has a Spline Output That Mates Directly with a Heavy Duty Bearing Block. The Frame of the TurboSaw Has an Anti-Wrap Feature to Prevent Twine or Vines from Wrapping Around the Drive Shaft.

Dougherty High Speed Cutting Disc for Compact Feller Buncher

Dougherty Accumulator Arm for Compact Feller Buncher

ACCUMULATOR ARM:
The Independently Controlled, Accumulator Arm on the CFB16 Allows the Operator to Cut & Carry Multiple Trees at One Time.

Dougherty CFB11 Compact Feller Buncher

Dougherty CFB16 Compact Feller Buncher

Dougherty CFB-11 Compact Feller Buncher


FELLER BUNCHER SPECIFICATIONS
MODEL CFB-11 CFB-16
CUTTING CAPACITY:
Throat Opening at the Teeth 16" 27"
Cutting Depth 11" Diameter 16" Diameter
Can cut at ground level
SKID LOADER COMPATIBILITY:
HP Requirements 60+ 75+
Hydraulic Flow Requirements 18 - 24 GPM 24 - 42 GPM
Mounting Type Universal Quick Attach
DIMENSIONS:
Length 30" 45"
Width 46" 46"
Height 75" 75"
Operating Weight 1,250 lbs. 1,700 lbs.
CUTTING DISC:
Disc Diameter 30" 40"
Thickness 1/2" 5/8"
Carbide Teeth 15 20
Saw Kerf (Cutting Width) 1"
Tooth Bite 1/8"
Cutting Disc RPM 1800 - 2000
Shielding 150° Shielding
Disc Weight 135 lbs. 177 lbs.
Accumulator Arm - Optional No Yes
Specifications & Designs Are Subject to Change Without Notice