| Home | Arbor, Forestry & Logging Equipment | Contact Us | We ship nationwide affordably !


BaumaLight Stump Grinders


TRACTOR STUMP GRINDERS


BaumaLight 3P24 Tractor Stump Grinder
Model 3P24


BaumaLight 3P34 Tractor Stump Grinder
Model 3P34


Bauma Light Tractor Stump Grinder Details
Details


SKID STEER STUMP GRINDERS


Bauma Light S18 Skid Steer Stump Grinder
Model S18


Bauma Light S24 Skid Steer Stump Grinder
Model S24


Bauma Light S28 Skid Steer Stump Grinder
Model S28


Bauma Light Skid Steer Stump Grinder Details
Details




Baumalight 3P24 Stump Grinder

For Tractors Equipped with 30-50 HP. Rip into Stumps with a 24" Rotor Carrying 34 Replacable Teeth.

The Cutting Wheel is Powered by the PTO (540) on your Tractor with the Swing and Lift Cylinders Activated by the Standard Remotes on the Tractor as Well. 34 Teeth on a 24” Cutter and 54 Teeth on a 34” Cutter means Less Cutting for each Tooth Resulting in Longer Tooth Life and Smoother Cutting for Less Wear on Your Tractor. Units are Shipped Standard with PTO Sshaft & Standard Quick Couplers. The Floating Deflector Contains the Chips and Debris and can be Swung Completely out of the Way to cut Close to Fences. Grease Zerks and Replaceable Brass Bushings Provided at Major Pivot Points for Extended Service Life. Heavy Tooth Population makes Finer Mulch and Allows much Smoother Operation.


3P24 STUMP GRINDER SPECIFICATIONS
Recommended HP Size 30 - 50
Maximum HP Size 60
Hydraulic GPM 5 - 20
Rotor Size 24"
Number of Teeth 34
Tooth Construction Carbide Steel Bolt In
Cutting Wheel Speed 810 RPM
Cutting Height - Above Ground 18"
Cutting Depth - Below Ground 8"
Maximum Cutting Depth - Per Pass 6"
Maximum Horizontal Cut 22"
Swing Arc 65o
Hub Torque 803 Ft. Lbs.
Over Torque Protection Slip Clutch
Hitch Cat I or II
No. of Remotes Required - Hydraulic 1 or 2
Requires 12 Volt DC No
Input Speed 540
Unit Weight (Shipping) 864 lbs.
Width (Shipping) 40"
Length (Shipping) 42"


Baumalight 3P34 Stump Grinder

With a 34" Rotor Carrying 54 Replacable Teeth, the 3P34 Transforms your 50-80 HP Tractor into a Stump Blasting Monster.

The Cutting Wheel is Powered by the PTO (540) on your Tractor with the Swing and Lift Cylinders Activated by the Standard Remotes on the Tractor as Well. 34 Teeth on a 24” Cutter and 54 Teeth on a 34” Cutter means Less Cutting for each Tooth Resulting in Longer Tooth Life and Smoother Cutting for Less Wear on Your Tractor. Units are Shipped Standard with PTO Sshaft & Standard Quick Couplers. The Floating Deflector Contains the Chips and Debris and can be Swung Completely out of the Way to cut Close to Fences. Grease Zerks and Replaceable Brass Bushings Provided at Major Pivot Points for Extended Service Life. Heavy Tooth Population makes Finer Mulch and Allows much Smoother Operation.


3P34 STUMP GRINDER SPECIFICATIONS
Recommended HP Size 50 - 80
Maximum HP Size 90
Hydraulic GPM 5 - 20
Rotor Size 34"
Number of Teeth 54
Tooth Construction Carbide Steel Bolt In
Cutting Wheel Spread 810 RPM
Cutting Height - Above Ground 25"
Cutting Depth - Below Ground 14"
Maximum Cutting Depth - Per Pass 9"
Maximum Horizontal Cut 32"
Swing Arc 65o
Hub Torque 803 Ft.-Lbs.
Over Torque Protection Slip Clutch
Hitch Cat II
No. of Remotes Required - Hydraulic 2
Requires 12 Volt DC No
Input Speed 540
Unit Weight (Shipping) 1,231 lbs.
Width (Shipping) 48"
Length (Shipping) 53"


Baumalight Tractor Stump Grinder Details


External Control
For Tractors with Only One Remote, this Control Splits Your Hydraulics into Two Controlled Functions.

Flow Control
This Adjustment Allows you to Fine Tune the Cutting Pass Speed to Match the Size and Performance of Your Tractor.



PTO
The 540 PTO Driven Stump Blasters are Designed for 3 Point Hitch Mount to Your 30 - 90 HP Tractors.

Gear Box
The Rugged Gear Box Transfers the PTO Power from the Tractor to the Stump Blaster Cutting System. Delivering 810 RPM and 803 ft.-lbs. of Torque Cutting Power to the Rotor and Teeth.



Stabilizer Base
The Heavy Duty Base Provides a Solid Base for Grinding. This Allows for More Consistent Grinding Performance and Reduces the Stress on Your Tractor.


Baumalight S18 Stump Grinder

Designed simply and ruggedly the S18 has a heavy duty fixed deflector. The simple direct flow hydraulic drive is designed to provide the best torque and RPM to the cutting head. The unique positioning of the rotor allows the operator an excellent view of the grinding action. The S18 is also available with a mini skid steer mount for even better access to tight areas

  • 12-25 GPM
  • 24" cutting wheel


S18 STUMP GRINDER SPECIFICATIONS
Rotor Size 24"
Number of Teeth 34"
Cutting Teeth Construction Carbide Steel Bolt-On
Cutting Wheel Speed 700 RPM
Cutting Height Above Ground No Limit
Cutting Depth Below Ground 10"
Max Cutting Depth per Pass 5"
Max. Horizontal Cut 22"
Swing Arc 0o
Hub Torque 250 ft.-lbs.
Over Torque Protection Relieve Valve
Recommended HP Size 25 - 80 HP
Hitch Quick Attach
Hydraulic GPM 12 - 25 GPM
# Of Remotes Required Hydraulic 1
Requires 12V DC Yes
Unit Weight (shipping) 510 lbs.
Width (shipping) 48"
Length (shipping) 48"

Stump Size Chart
12 GPM 7"
15 GPM 14"
20 GPM 20"
25 GPM 24"




Baumalight Quick Attach S24 Stump Grinder

Ideal For Removing Hard Wood Stumps Up to 24"

STANDARD FEATURES

  • 15 - 23 GPM (Works best from 20 - 23)
  • Cutting wheel is powered by the hydraulic remotes on skid steer & swing cylinder is controlled with a 12V diverter valve.
  • Offset rotor design for greater visibility.
  • 36 teeth on a 24" wheel means less cutting for each tooth resulting in longer tooth life & smoother cutting for less wear on your skid steer.
  • Unit is shipped with standard skid steer quick attach, 12V cigarette light plug, and flat-face quick couplers.
  • A 12V diverter valve allows the S24 to have not only a hydraulic drive but also a swing cylinder for a more refined cutting pass. This needle valve allows precise control of the cutting pass, and you to grind more of the stump without repositioning.


S24 STUMP GRINDER SPECIFICATIONS
Rotor Size 24"
Number of Teeth 36
Cutting Teeth Construction Carbide Steel Bolt-On
Cutting Wheel Speed 700 RPM
Cutting Height Above Ground No Limit
Cutting Depth Below Ground 10"
Max. Cutting Depth per Pass 6"
Max. Horizontal Cut 22"
Swing Arc 80o
Hub Torque 250 ft./lbs.
Recommended HP Size 30 - 60 HP
Hitch Quick Attach
Hydraulic GPM 15 - 23
Number of Remotes Required 1
Requires 12 Volt DC yes
Unit Weight (Shipping) 850 lbs.
Width (Shipping) 48"
Length (Shipping) 56"




Baumalight Model S28 Stump Grinder

STANDARD FEATURES

  • 23 to 35 GPM (Works Well From 25 - 35)
  • Cutting Wheel is Powered By the Hydraulic Remotes on Skid Steer & Swing Cylinder is Controlled with a 12V Diverter Valve.
  • Off Set Rotor Design For Greater Visibility.
  • 36 Teeth on a 24" Wheel Means Less Cutting For Each Tooth Resulting in Longer Tooth Life & Smoother Cutting For Less Wear on Your Skid Steer.
  • Unit is Shipped with Standard Skid Steer Quick Attach, 12V Cigarette Light Plug, and Flat-Face Quick Couplers.
  • For high flow and higher HP skid steers the S28 adds a high volume hydraulic motor and a gearbox that increases the torque to the cutting head. Giving you the best of precision, power and speed in your grinding. The S24 and S28 ship with a convenient 12V cigarette lighter plug to power the diverter valve.


S28 STUMP GRINDER SPECIFICATIONS
Rotor Size 24"
Number of Teeth 36
Cutting Teeth Construction Carbide Steel Bolt-On
Cutting Wheel Speed 800 RPM
Cutting Height Above Ground No Limit
Cutting Depth Below Ground 10"
Max. Cutting Depth Per Pass 6"
Max. Horizontal Cut 22"
Swing Arc 80o
Hub Torque 803 ft.-lbs.
Recommended HP Size 30 - 60 HP
Hitch Quick Attach
Hydraulic GPM 23 - 35
Number of Remotes Required 1
Requires 12 Volt DC yes
Unit Weight (Shipping lbs.) 1,120 lbs.
Shipping Width 48"
Shipping Length 56"



Baumalight Skid Steer Stump Grinder Details


More Teeth
Many hands make light work, or in this case fine mulch faster and easier. The high number of teeth means that each tooth needs to do less work. Each of the Stump Blasters teeth only need to make a small cut, this reduces the strain on each tooth for longer tooth life and less HP required. This design also produces smoother operation, finer mulch, quicker grind times.

More Clearance
The Stump Blaster’s carbide teeth extend a full 1 1/4 inches from the rotor. This prevents chips and mulch from getting plugged up during grinding. Greater chip clearing produces smoother operation and reduces heat build up that could damage the rotor and cause premature tooth failure.



Replaceable Teeth
Even under heavy usage, the design of the Stump Blaster cutting system means you will have less teeth to replace. Because the work is shared by more of these rugged teeth they last longer and usually you only have to replace 2 or 3 at a time. The bolt-on designed teeth allow for straightforward replacement.

Carbide Tipped
Like the finest saw blades, the cutting teeth on Stump Blasters are carbide tipped. This incredibly hard material ensures reliable cutting performance. When grinding stumps buried hazards are inevitable, gravel, stones even metal posts are not uncommon to “find”. Our carbide teeth are designed to stand up to this abuse and keep on blasting stumps to dust.



Floating Deflector
The deflector floats as you grind providing chip and debris control from first cut to maximum depth without getting in the way. In tight grinding situations the deflector can be flipped up out of the way.

Rotor
The massive 3/4 inch thick steel rotor provides the back bone for the Stump Blaster Cutting system. It is the anchor for the carbide tipped teeth. For smooth operation it is important that the rotor remains solid with no flexing. The impressively rugged rotor also provided the Stump Blaster with the extra momentum needed when the grinding is tough, making sure the Stump Blaster can power through the hardest stumps.




Copyright © 2004 - 2016 by Iowa Farm Equipment