|
Baumalight Skid Steer Mulchers
Get Results
Operator comfort and precise manoeuvres are what set apart Brush Fire skid steer models. Built with you in mind before you even get in the machine. Using industry standard quick attach and quick couplers (standard on A450 and B550 motors) your Brush Fire is hooked up in less than a minute. A Step Point with grip pad also makes getting in a whole lot easier. Once you are in the cab the full controls are at your command. The easily viewable gauges give you the information you need to optimize your cutting results. The hydraulic system is designed with flex couplers to prolong life by protecting the motor bearing. The super strength timer belt is designed to drive the rotor without slipping while the built in relief valves protect the system all without the need to stop and change a shear pin. The Brush Fire hydraulic drive allows you to move slowly if the terrain and obstacles demand it, without compromising the clearing performance. Mounted on the boom the Brush Fire can reach high and hungrily mulch down from the top. The view of the action is right in front of you, so sit back relax and prepare to lay waste to whatever is in your path
|
| Skid Steer Mulcher Specifications |
| Model No. |
MF 548 |
MF 760 |
| Path Width |
62" |
75" |
| Rotor Width |
48" |
60" |
| Maximum Engine HP |
Check GPM & PSI |
| Minimum Engine HP |
35 HP |
60 HP |
| Maximum Brush Size |
5" |
10" |
| cutting Depth |
1.5" Above to 1" Below Grade |
| Number of Cutters |
104 |
126 |
| Slashes Per Second |
2750 - 6700 |
4620 - 8400 |
| Hitch Type |
Skid Steer |
| Hitch Size |
Universal |
| System Protection |
Built-In Relief |
| Shipping Size |
64" x 36" x 40" |
80" x 48" x 65" |
| Unit Weight |
1,500 lbs. |
2,100 lbs. |
|
| Model |
Recommended GPM |
Max GPM* |
Max. PSI |
Requires Case Drain |
Hydraulic Couplers |
Shipping Weight |
Motor Options |
| MF 548 |
12-20 GPM |
20 GPM |
3000 PSI |
No |
Included |
1,427 lbs. |
A450 |
| 12-24 GPM |
24 GPM |
3000 PSI |
Yes |
Included |
1,450 lbs. |
B550 |
| 16-25 GPM |
30 GPM |
4500 PSI |
Yes |
Not Supplied |
1,490 lbs. |
C530 |
| 19-30 GPM |
35 GPM |
4500 PSI |
Yes |
Not Supplied |
1,490 lbs. |
C540 |
| MF 760 |
25-35 GPM |
40 GPM |
4500 PSI |
Yes |
Not Supplied |
1,980 lbs. |
C550 |
| 28-45 GPM |
40 GPM |
4500 PSI |
Yes |
Not Supplied |
1,980 lbs. |
C570 |
|
A450 Motor Specifications / Brush Cutting Sizes
|
| |
Hydraulics |
Operation |
12 GPM |
15 GPM |
18 GPM |
20 GPM |
21 GPM |
Double Tree Size for "Stop & Crawl" Cutting |
2500 PSI |
Steady Forward |
0.75" Brush |
1" Brush |
1.25" Brush |
1.5" Brush |
Warning* |
| 3000 PSI |
Steady Forward |
1" Brush |
1.25" Brush |
1.5" Brush |
2" Brush |
Warning* |
| RPM: |
|
|
832 RPM |
924 RPM |
1088 RPM |
1215 RPM |
|
|
B550 Motor Specifications / Brush Cutting Sizes
|
| |
Hydraulics |
Operation |
12 GPM |
20 GPM |
22 GPM |
24 GPM |
25 GPM |
Double Tree Size for "Stop & Crawl" Cutting |
2500 PSI |
Steady Forward |
0.75" Brush |
1.5" Brush |
2" Brush |
2.25" Brush |
Warning* |
| 3000 PSI |
Steady Forward |
1" Brush |
2" Brush |
2.25" Brush |
2.5" Brush |
Warning* |
| RPM: |
|
|
693 RPM |
1201 RPM |
1324 RPM |
1478 RPM |
|
|
C530 Motor Specifications / Brush Cutting Sizes
|
| |
Hydraulics |
Operation |
16 GPM |
19 GPM |
22 GPM |
25 GPM |
40 GPM |
Double Tree Size for "Stop & Crawl" Cutting |
2500 PSI |
Steady Forward |
1" Brush |
1.5" Brush |
2" Brush |
2.25" Brush |
Warning* |
| 3000 PSI |
Steady Forward |
1.5" Brush |
2" Brush |
2.25" Brush |
3" Brush |
Warning* |
| 3500 PSI |
Steady Forward |
2" Brush |
2.5" Brush |
3" Brush |
3.5" Brush |
Warning* |
| 4000 PSI |
Steady Forward |
2.5" Brush |
3" Brush |
3.5" Brush |
4" Brush |
Warning* |
| RPM: |
|
|
1100 RPM |
1350 RPM |
1500 RPM |
1800 RPM |
|
|
C540 Motor Specifications / Brush Cutting Sizes
|
| |
Hydraulics |
Operation |
19 GPM |
25 GPM |
27 GPM |
30 GPM |
40 GPM |
Double Tree Size for "Stop & Crawl" Cutting |
3000 PSI |
Steady Forward |
2" Brush |
3" Brush |
3.5" Brush |
4" Brush |
Warning* |
| 3500 PSI |
Steady Forward |
2.5" Brush |
3.5" Brush |
4" Brush |
4.5" Brush |
Warning* |
| 4000 PSI |
Steady Forward |
3" Brush |
4" Brush |
4.5" Brush |
5" Brush |
Warning* |
| RPM: |
|
|
1050 RPM |
1500 RPM |
1700 RPM |
1800 RPM |
|
|
C550 Motor Specifications / Brush Cutting Sizes
|
| |
Hydraulics |
Operation |
25 GPM |
27 GPM |
30 GPM |
35 GPM |
40 GPM |
Double Tree Size for "Stop & Crawl" Cutting |
3000 PSI |
Steady Forward |
3" Brush |
3.5" Brush |
4" Brush |
4.5" Brush |
5" Brush |
| 3500 PSI |
Steady Forward |
3.5" Brush |
4" Brush |
4.5" Brush |
5" Brush |
5.5" Brush |
| 4000 PSI |
Steady Forward |
4" Brush |
4.5" Brush |
5" Brush |
5.5" Brush |
6" Brush |
| RPM: |
|
|
1340 RPM |
1500 RPM |
1600 RPM |
1875 RPM |
2140 RPM |
|
C570 Motor Specifications / Brush Cutting Sizes
|
| |
Hydraulics |
Operation |
27 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
Double Tree Size for "Stop & Crawl" Cutting |
3000 PSI |
Steady Forward |
3.5" Brush |
4" Brush |
4.5" Brush |
5" Brush |
5.5" Brush |
| 3500 PSI |
Steady Forward |
4" Brush |
4.5" Brush |
5" Brush |
5.5" Brush |
6" Brush |
| 4000 PSI |
Steady Forward |
4.5" Brush |
5" Brush |
5.5" Brush |
6" Brush |
6.5" Brush |
| RPM: |
|
|
1100 RPM |
1220 RPM |
1400 RPM |
1630 RPM |
1830 RPM |
|
|
|
Baumalight Excavator Mulchers
Strike Force
Precision Strike Force is the term that best describes the MX748 this excavator version of the Brush Fire brings together power and precise control. Search and destroy, paired with an excavator an operator can mulch around objects reducing casualties of innocent bystanding trees while removing the cumbersome brush. Excavators can also go where tractors and skid steers fear to tread. This gives you greater access to areas that have had to be cleared by hand in the past. Clearing stubborn brush from steep ditches from the comfort and safety of the level ground. Reaching over and around objects is no problem with the proven brush clearing appetite of Brush Fire
|
| MX748 Specifications |
| Path Width |
62" |
| Rotor Width |
48" |
| Maximum Engine HP |
Check GPM & PSI |
| Minimum Engine HP |
35 HP |
| Maximum Brush Size |
12" |
| Cutting Depth |
1.5" Above to 1" Below Grade |
| Number of Cutters |
104 |
| Slashes Per Second |
3250 - 8800 |
| Hitch Type |
Excavator |
| Hitch Size |
Universal |
| System Protection |
Built-In Relief |
| Shipping Size |
64" x 36" x 40" |
| Unit Weight |
1,500 lbs. |
|
| Model |
Recommended GPM |
Max GPM* |
Max. PSI |
Requires Case Drain |
Hydraulic Couplers |
Shipping Weight |
Motor Options |
| MX 748 |
16-25 GPM |
30 GPM |
4500 PSI |
Yes |
Not Supplied |
1,520 lbs. |
C530 |
| 19-30 GPM |
35 GPM |
4500 PSI |
Yes |
Not Supplied |
1,520 lbs. |
C540 |
| 25-35 GPM |
40 GPM |
4500 PSI |
Yes |
Not Supplied |
1,520 lbs. |
C550 |
| 28-45 GPM |
50 GPM |
4500 PSI |
Yes |
Not Supplied |
1,520 lbs. |
C570 |
| 38-50 GPM |
60 GPM |
4500 PSI |
Yes |
Not Supplied |
1,520 lbs. |
C590 |
|
C530 Motor Specifications / Brush Cutting Sizes
|
| |
Hydraulics |
Operation |
16 GPM |
19 GPM |
22 GPM |
25 GPM |
40 GPM |
Double Tree Size for "Stop & Crawl" Cutting |
2500 PSI |
Steady Forward |
1" Brush |
1.5" Brush |
2" Brush |
2.5" Brush |
Warning* |
| 3500 PSI |
Steady Forward |
1.5" Brush |
2" Brush |
2.5" Brush |
3" Brush |
Warning* |
| 3500 PSI |
Steady Forward |
2" Brush |
2.5" Brush |
3" Brush |
3.5" Brush |
Warning* |
| 4000 PSI |
Steady Forward |
2.5" Brush |
3" Brush |
3.5" Brush |
4" Brush |
Warning* |
| RPM |
|
|
1100 RPM |
1350 RPM |
1500 RPM |
1800 RPM |
|
|
C540 Motor Specifications / Brush Cutting Sizes
|
| |
Hydraulics |
Operation |
19 GPM |
25 GPM |
27 GPM |
30 GPM |
40 GPM |
Double Tree Size for "Stop & Crawl" Cutting |
3000 PSI |
Steady Forward |
2" Brush |
3" Brush |
3.5" Brush |
4" Brush |
Warning* |
| 3500 PSI |
Steady Forward |
2.5" Brush |
3.5" Brush |
4" Brush |
4.5" Brush |
Warning* |
| 4000 PSI |
Steady Forward |
3" Brush |
4" Brush |
4.5" Brush |
5" Brush |
Warning* |
| RPM |
|
|
1050 RPM |
1500 RPM |
1700 RPM |
1800 RPM |
|
|
C550 Motor Specifications / Brush Cutting Sizes
|
| |
Hydraulics |
Operation |
25 GPM |
27 GPM |
30 GPM |
35 GPM |
40 GPM |
Double Tree Size for "Stop & Crawl" Cutting |
3000 PSI |
Steady Forward |
3" Brush |
3.5" Brush |
4" Brush |
4.5" Brush |
5" Brush |
| 3500 PSI |
Steady Forward |
3.5" Brush |
4" Brush |
4.5" Brush |
5" Brush |
5.5" Brush |
| 4000 PSI |
Steady Forward |
4" Brush |
4.5" Brush |
5" Brush |
5.5" Brush |
6" Brush |
| RPM |
|
|
1340 RPM |
1500 RPM |
1600 RPM |
1875 RPM |
2140 RPM |
|
C570 Motor Specifications / Brush Cutting Sizes
|
| |
Hydraulics |
Operation |
27 GPM |
30 GPM |
35 GPM |
40 GPM |
45 GPM |
Double Tree Size for "Stop & Crawl" Cutting |
3000 PSI |
Steady Forward |
3.5" Brush |
4" Brush |
4.5" Brush |
5" Brush |
5.5" Brush |
| 3500 PSI |
Steady Forward |
4" Brush |
4.5" Brush |
5" Brush |
5.5" Brush |
6" Brush |
| 4000 PSI |
Steady Forward |
4.5" Brush |
5" Brush |
5.5" Brush |
6" Brush |
6.5" Brush |
| RPM |
|
|
1100 RPM |
1220 RPM |
1400 RPM |
1630 RPM |
1830 RPM |
|
C590 Motor Specifications / Brush Cutting Sizes
|
| |
Hydraulics |
Operation |
35 GPM |
40 GPM |
42 GPM |
45 GPM |
50 GPM |
Double Tree Size for "Stop & Crawl" Cutting |
3000 PSI |
Steady Forward |
4.5" Brush |
5" Brush |
5.25" Brush |
5.5" Brush |
6" Brush |
| 3500 PSI |
Steady Forward |
5" Brush |
5.5" Brush |
5.75" Brush |
6" Brush |
6.5" Brush |
| 4000 PSI |
Steady Forward |
5.5" Brush |
6" Brush |
6.25" Brush |
6.5" Brush |
7" Brush |
| RPM |
|
|
1100 RPM |
1260 RPM |
1300 RPM |
1420 RPM |
1570 RPM |
|
|
| MULCHER DETAILS |
|
Rows and Rows of Hungry Teeth
The heart of the Brush Fire system is the design of the rotor. Rows and rows of brush destroying teeth placed in Dual Staggered Spirals. Each tooth is carbide tipped and bolt on replaceable for easy servicing even in the field. The number and placement of these cutting teeth provides uncompromising mulching results of not only brush and trees but grass, vegetation and the occasional stone. Rows of teeth are mounted on staggered spiral 3/4 inch steel blades delivering a fine mulch.
|
Brush Pusher Bar
The Brush Pusher Bar gives the brush fair warning of what is coming and pushes brush and trees away from the operator.
|
|
|
Adjustable Skid Shoes
These two position skid shoes allow you to adjust the cutting height for optimal clearing performance.
|
Heavy Duty Frame
Brush Fire frames are built to inflict brush punishing mulching action again and again.
|
|
|
Chain Link Curtain
Once the teeth have had their way with the brush, the chain link curtain helps control the flying mulch and debris without getting in the way
|