BaumaLight Skid Steer Mulchers

Bauma Light MS300 Skid Steer Mulchers
MS300 Series

Bauma Light MS500 Skid Steer Mulchers
MS500 Series

Bauma Light MX700 Skid Steer Mulchers
MS700 Series



Baumalight MS300 Series Skid Steer Mulchers

MS348
When You Are on a Budget for Hydraulic Power, the MS348 Gets You to the Bottom Line. Designed for Skid Steers with Flows Between 12 & 20 GPM, this Brush Fire is Ready to Tear It Up. Ruggedly Built & Ready to Clear a Path Through Brush Up to 2" in Diameter, be Glad this Brush Fire Is on Your Side.



MS348 MULCHER SPECIFICATIONS
Path Width 60"
Rotor Width 48"
Maximum Engine HP Check GPM & PSI
Minimum Engine HP 30 HP
Cutting Depth Level
Number of Cutters 60
Slashes Per Second 800 - 1200
Hitch Type Skid Steer
Hitch Size Universal
System Protection Built-In Relief
Shipping Dimensions 62" L x 40" W x 40" H
Unit Weight 950 lbs.

300 SERIES SKID STEER | MAXIMUM BRUSH CUTTING SIZES
Double Tree Size for 'Stop & Chew' Cutting**
HYDRAULICS OPERATION 12 GPM 15 GPM 18 GPM 20 GPM 21 GPM
2500 PSI Slow Forward 0.75" Brush 1" Brush 1.25" Brush 1.5" Brush N/A*
3000 PSI Slow Forward 1" Brush 1.25" Brush 1.5" Brush 2" Brush N/A*
RPM   832 RPM 924 RPM 1088 RPM 1215 RPM  
*NOTICE: This value must never be exceeded or warranty is voided.
**Do not double for top down mulching with excavators.


Baumalight MS500 Series Skid Steer Mulchers


GET RESULTS
Operator Comfort & Precise Maneuvers Are What Set Apart Brush Fire Skid Steer Models. Built with You in Mind Before You Even Get in the Machine. Using Industry Standard Quick Attach & Quick Couplers (Standard on A450 & B550 Motors) Your Brush Fire is Hooked Up in Less Than a Minute. A Step Point with Grip Pad Also Makes Getting in a Whole Lot Easier.

Once You Are in the Cab the Full Controls are at Your Command. The Easily Viewable Gauges Give You the Information You Need to Optimize Your Cutting Results. The Hydraulic System is Designed with Flex Couplers to Prolong Life by Protecting the Motor Bearing. The Super Strength Timer Belt is Designed to Drive the Rotor Without Slipping, While the Built In Relief Valves Protect the System All Without the Need to Stop & Change a Shear Pin. The Hydraulic Driven Brush Fire Allows the Skidsteer to Move Slowly if the Terrain & Obstacles Demand It, Without Compromising the Clearing Performance.


Mounted on the Boom the Brush Fire Can Reach High & Hungrily Mulch Down From the Top. The View of the Action is Right in Front of You, So Sit Back, Relax & Prepare to Lay Waste to Whatever Is In Your Path.

SKID STEER

  • Easily Viewable Gauges.
  • Full Control from Operator's Seat.
  • Step Point & Grip Pads.
  • Powerful Mulching on Low Flow.
  • Bearing Protections.
  • Super Strength Timer Belt.


MS500 SERIES MULCHER SPECIFICATIONS
MODEL MS548 MS560
Path Width 62" 75"
Rotor Width 48" 60"
Maximum Engine HP Check GPM & PSI
Minimum Engine HP 45 HP 60 HP
Cutting Depth 1.5" Above to 1" Below Grade
Number of Cutters 104 126
Slashes Per Second 2750 - 6700 4620 - 8400
Hitch Type Skid Steer
Hitch Size Universal
System Protection Built-In Relief
Shipping Dimensions 64" L x 44" W x 44" H 56" L x 78" W x 60" H
Unit Weight 1,490 lbs. 2,115 lbs.

MOTOR OPTIONS
C-Mount Motors are Bent Axis Piston Motors

MS548
  • A450
  • B550
  • C510
  • C530
  • C540
MS560
  • C510
  • C530
  • C540
  • C550

MAXIMUM BRUSH CUTTING SIZES


A450 HYDRAULICS CASE DRAIN OPERATION 12 GPM 15 GPM 18 GPM 20 GPM 21 GPM
Double Brush Size for "Stop & Chew" Cutting** 2500 PSI Not Needed Slow Forward 1" Brush 1.25" Brush 1.5" Brush 2" Brush N/A*
3000 PSI Not Needed Slow Forward 1" Brush 1.25" Brush 1.5" Brush 2" Brush N/A*
3500 PSI Dumping Over Relief 1" Brush 1.25" Brush 1.5" Brush 2" Brush N/A*
RPM   832 RPM 924 RPM 1088 RPM 1215 RPM  

B550 HYDRAULICS CASE DRAIN OPERATION 12 GPM 20 GPM 22 GPM 26 GPM 27 GPM
Double Brush Size for "Stop & Chew" Cutting** 2500 PSI Good to Have Slow Forward 1" Brush 1.25" Brush 1.75" Brush 2.25" Brush N/A*
3000 PSI Good to Have Slow Forward 1.25" Brush 2.25" Brush 2.5" Brush 2.75" Brush N/A*
3500 PSI Dumping Over Relief 1.25" Brush 2.25" Brush 2.5" Brush 2.75" Brush N/A*
RPM   693 RPM 1201 RPM 1324 RPM 1490 RPM  

C510 HYDRAULICS CASE DRAIN OPERATION 12 GPM 15 GPM 18 GPM 22 GPM 27 GPM 30 GPM
Double Brush Size for "Stop & Chew" Cutting** 2500 PSI Critical Slow Forward 1.5" Brush 2.25" Brush 2.5" Brush 2.75" Brush 3" Brush N/A*
3000 PSI Critical Slow Forward 2" Brush 2.5" Brush 3" Brush 3.25" Brush 3.5" Brush N/A*
3500 PSI Critical Slow Forward 2.5" Brush 3" Brush 3.5" Brush 3.75" Brush 4" Brush N/A*
4000 PSI Critical Slow Forward 3" Brush 3.5" Brush 4" Brush 4.25" Brush 4.5" Brush N/A*
RPM   1190 RPM 1490 RPM 1790 RPM 2200 RPM 2500 RPM  

C530 HYDRAULICS CASE DRAIN OPERATION 18 GPM 22 GPM 25 GPM 30 GPM 35 GPM 40 GPM
Double Brush Size for "Stop & Chew" Cutting** 2500 PSI Critical Slow Forward 1.25" Brush 2.25" Brush 3" Brush 3.25" Brush 3.5" Brush N/A*
3000 PSI Critical Slow Forward 1.75" Brush 2.75" Brush 3.5" Brush 3.5" Brush 4" Brush N/A*
3500 PSI Critical Slow Forward 2.25" Brush 3.25" Brush 4" Brush 4" Brush 4.5" Brush N/A*
4000 PSI Critical Slow Forward 2.75" Brush 3.5" Brush 4.5" Brush 4.5" Brush 5" Brush N/A*
RPM (Best Performance at 1800 RPM) 1300 RPM 1500 RPM 1800 RPM 2100 RPM 2500 RPM  

C540 HYDRAULICS CASE DRAIN OPERATION 25 GPM 27 GPM 30 GPM 35 GPM 40 GPM 48 GPM
Double Brush Size for "Stop & Chew" Cutting** 3000 PSI Critical Slow Forward 2.75" Brush 3.5" Brush 4" Brush 4.25" Brush 4.5" Brush N/A*
3500 PSI Critical Slow Forward 3.25" Brush 4" Brush 4.5" Brush 4.75" Brush 5" Brush N/A*
4000 PSI Critical Slow Forward 3.75" Brush 4.5" Brush 5" Brush 5.25" Brush 5.5" Brush N/A*
RPM (Best Performance at 1800 RPM) 1500 RPM 1700 RPM 1800 RPM 2100 RPM 2400 RPM  

C550 HYDRAULICS CASE DRAIN OPERATION 28 GPM 30 GPM 35 GPM 40 GPM 45 GPM 52 GPM
Double Brush Size for "Stop & Chew" Cutting** 3000 PSI Critical Slow Forward 3.5" Brush 3.75" Brush 4.5" Brush 5.5" Brush 5.75" Brush N/A*
3500 PSI Critical Slow Forward 4" Brush 4.25" Brush 5" Brush 6" Brush 6.25" Brush N/A*
4000 PSI Critical Slow Forward 4.5" Brush 4.75" Brush 5.5" Brush 6.5" Brush 6.75" Brush N/A*
RPM (Best Performance at 1800 RPM) 1500 RPM 1600 RPM 1875 RPM 2140 RPM 2400 RPM  

*NOTICE: This value must never be exceeded or warranty is voided. Will cause equipment damage.
**Do not double for top down mulching with excavators.


Baumalight MS700 Series Skid Steer Mulchers


25-42 GPM (Recommended)
A 60" Rotor & 78 Teeth Transform Skidsteers Into Brush Devouring Machines. The Heavy Brush Bar & Skid Shoes Make Sure You Can Push Through Without Getting Bogged Down. Hose Armour & Shields Protect the Hoses While You Attack the Brush.



MS700 SERIES MULCHER SPECIFICATIONS
MODEL iMS760
Path Width 75"
Rotor Width 60"
Maximum Engine HP Check GPM & PSI
Minimum Engine HP 65 HP
Cutting Depth Level to 2" Below Level
Number of Cutters 78
Hitch Type Skid Steer
Hitch Size Universal
System Protection Built-In Relief
Shipping Dimensions 82" L x 61" W x 73" H
Unit Weight 3,044 lbs.

MOTOR OPTIONS
C-Mount Motors are Bent Axis Piston Motors

iMS760
  C540
  C550
  C570

UNDERSTANDING MOTOR OPTIONS


MAXIMUM BRUSH CUTTING SIZES
1800 RPM is Optimum Cutting Performance


C540 HYDRAULICS CASE DRAIN OPERATION 25 GPM 27 GPM 30 GPM 35 GPM 40 GPM 48 GPM
Double Brush Size for "Stop & Chew" Cutting** 3000 PSI Critical Slow Forward 3.6" Brush 4.6" Brush 5.2" Brush 5.5" Brush 5.9" Brush N/A*
3500 PSI Critical Slow Forward 4.2" Brush 5.2" Brush 5.9" Brush 6.2" Brush 6.5" Brush N/A*
4000 PSI Critical Slow Forward 4.9" Brush 5.9" Brush 6.5" Brush 6.8" Brush 7.2" Brush N/A*
RPM (Best Performance at 1800 RPM) 1500 RPM 1700 RPM 1800 RPM 2100 RPM 2400 RPM  

C550 HYDRAULICS CASE DRAIN OPERATION 28 GPM 30 GPM 35 GPM 40 GPM 45 GPM 52 GPM
Double Brush Size for "Stop & Chew" Cutting** 3000 PSI Critical Slow Forward 4.6" Brush 4.9" Brush 5.9" Brush 7.2" Brush 7.5" Brush N/A*
3500 PSI Critical Slow Forward 5.2" Brush 5.5" Brush 6.5" Brush 7.8" Brush 8" Brush N/A*
4000 PSI Critical Slow Forward 5.9" Brush 6.2" Brush 7.2" Brush 8.5" Brush 8.8" Brush N/A*
RPM (Best Performance at 1800 RPM) 1500 RPM 1600 RPM 1875 RPM 2140 RPM 2400 RPM  

C570 HYDRAULICS CASE DRAIN OPERATION 38 GPM 40 GPM 45 GPM 50 GPM 58 GPM 65 GPM
Double Brush Size for "Stop & Chew" Cutting** 3000 PSI Critical Slow Forward 5.9" Brush 7.2" Brush 7.8" Brush 8.5" Brush 9" Brush N/A*
3500 PSI Critical Slow Forward 6.5" Brush 7.8" Brush 8.5" Brush 9.1" Brush 10" Brush N/A*
4000 PSI Critical Slow Forward 7.2" Brush 8.5" Brush 9.1" Brush 9.8" Brush 11" Brush N/A*
RPM (Best Performance at 1800 RPM) 1500 RPM 1630 RPM 1830 RPM 2030 RPM 2400 RPM  

*NOTICE: This value must never be exceeded or warranty is voided. Will cause equipment damage.
**Do not double for top down mulching with excavators.